Tempomat

Tempo adjustment tool.

 (2 Votes)
1.3 (Updated 3 years ago)
155.7kB
August 21, 2015
Reaktor 6
Sequencer elements

DESCRIPTION

Like vinyl touch, Tempomat has a dynamic adjustment, and static tempo setting options as in pitch adjustment on turntables or other players, to match the beat in a mix.
The calculated BPM can be sent to reaktor itself via OSC.
In addition to the clickable clock-like looking surface an external generic, or a Xone midi controller Jog can be used. A takt signal is sent, as audio out, which is a 4/4 click.

Version 1.4

- The Start/Stop buttons have now custom graphics.

COMMENTS  (4)

Please login to add a comment
Mark Wadewitz
3 years ago
Got it working: sending IP: same as receiving IP (127.0.0.1 wasn´t listed here, choosed another). Sending Port: same like receiving Port. OSC SEND Identifier name: user definable OSC SEND pattern: must be /__BPM (2x underline).
Mark Wadewitz
3 years ago
I can´t get the OSC /__BPM feedback to Reaktor working. All settings are correct. Where do you have that info from?
István Király
8 years ago
Updated to 1.1 Added a generic Midi controller opt, and Start/Stop buttons.
István Király
8 years ago
Send the BPM to reaktor itself via OSC. To activate: Go to OSC settings enable OSC on the OSC send panel Name: Self IP: 127.0.0.1 Port: 10000 On the OSC Sync panel Enable Sync as slave, Time Sync, from self Find the OSC send module in your Instrument > Tempoclock Verify that Self is a target, and that the URL pattern is /__BPM
now