How to record an external audio signal with MASCHINE

Eine deutschsprachige Fassung dieses Artikels finden Sie als PDF unterhalb des englischen Textes.


1. Open the MASCHINE Audio and MIDI Settings (in the File menu), click on the Routing tab and go to the Input section. Then select the inputs on your audio interface the external audio source is connected to. In our example the external source is connected to the inputs 1 and 2 of the audio interface, so we select these inputs for MASCHINE's input channels 1 L and R (see screenshot).
Input_Routing

2. Go to the sampler area in MASCHINE and open the Record tab, then select Ext to prepare MASCHINE for recording an external source. Open the Input menu and select the channels you assigned your external audio source to in step 1 of this article. In our example, we choose Input 1 L+R (see screenshot).
Sampler

3. If the external source is already playing, you will see an amplitude on the level meter. Activate the monitor button to listen to the signal (see screenshot).
level_monitor

4. Adjust the Threshold value. When the START button is clicked, recording starts once the input level exceeds the Threshold.

5. Click STOP to stop recording. The recorded sample appears in a small box below the waveform window and can be dragged and dropped to Sounds from there or be deleted by clicking on the small X in the upper right corner of the box (see screenshot).
sample_symbols

Attachments:

Related Articles:

Product Group:
MASCHINE
Product:
MASCHINE
Software Version:
MASCHINE 1.x
Category:
Product Operation
Do you found this article helpful? Thank you for supporting us!
979 | 12 / 6