RESYNTHER

still buggy specially on pc it produce a nan.

(87 Votes)
3.1 (Updated 14 years ago)
4.7MB
November 17, 2004
Reaktor 5 or lower
Instrument Sampler

DESCRIPTION

I've always loved to put a sample in metasynth (the soft) and stretch the sound to hear the harmonic evolution.this is my attemp to do that in reaktor.

load a sample in resynther and slow the speed, the sound will change during the song, at slow speed you'll hear very different sound.

I also put a micro tuning, and a filter section.

the other big thing in that synth is that every parameter of the filter section is connected to drawable dynamical env that can also run as seq.(20 enveloppes available)

draw the attack at low vel and high vel,and do the same for the release, the env will change with the velocity.

and there is also drawable dynmical lfo: draw the shape at low and high vel.
(20 shapes available)


I didn't put many snapshot to let you room to draw.
but with only these one you have many sound just changing the speed and the root key.

the overlap knob is the main knob to unload the cpu,
press restart in the sampler to get the sample play.

assignation of the env and lfo are in the tips of the table.
tips included specially on the first env and first lfo.

I put a quick tutorial in the folder,read it it will take you five minutes and will save your time as this synth is very easy to use.once you get the trick

all the snapshot have jitters I should have put some without.

I also add other instruments to do wavetable,waver I and II, they remove volume from any samples and one use a pitchformer to remove melody.so you can use note samples or part of a cd,or human text or whatever you want!;-)

one instrument is called nan, nans sometimes occur press the nan button twice.


it use 2 grain delay so it's a CPU balrog, I run it at 11000 kHz.at start you just have one voice for you not to have cpu overload.but you can put sampler grain cloud and filters in mono.let say that this one will reach is full potential in two or thre years;-)
but maybe not.if some can run it with four voices at 44,1kHz on a laptop please put in the comment the model you have so that i can buy the same.thanks!

have fun!!!!
----------------------------------------------------------
VERY IMPORTANT!!!!!!!!!!!!!
P.S:windows user seems to have problem so in this version the nan is off so press it to have the ensemble enable.I think it is due to a loop in the filter section so I set resynther to loop enable off in the property instrument but I'm not sure it's gonna work this way.but try to set the instrument to loop enable on.:-/

COMMENTS  (21)

melvin lewis
13 years ago
Hey im a new reaktor guy and i love making new sounds,can u make a beat slicer that has sound manipulation ,roll,time strech and rev(with out the built in sequencer.(i want to play all my loops by hand.) thanx please help me out......chaos .ps if u do make please email me back... noizetrip@comcast.net
Soarer
14 years ago
I hope you will be able to fix it erwan. It looks really interesting and I'd like to try it out.
toto le robot
14 years ago
the problem com from a nan being created somewhere,but as I have this problem rarely, and don't have time to use it on the moment, (that's why I release other instrument at the same time). maybe this will be fix one day or if some one can report me which module or macro makes nan, I'll fix the problem. sorry:-/
Thomas Weber
14 years ago
I wasn't trying to be selfish or uncooperative. I'd help in any way I can, if and when I had time. The truth is that I'm simply not experienced enough at building ensembles to be much help in debugging other people's nontrivial work, especially when problems appear to be on the fringes of what Reaktor can handle, and which also may be exposing rare bugs in the program. But like I suggested above, I personally have never seen an ensemble crash Reaktor like this. I also shouldn't have made it sound like I was speaking for anyone else but me. Sorry. But I'm glad to see that you have CList coming to the rescue.
Thomas Weber
14 years ago
Erwan, don't expect many people to spend a lot of time analyzing you ensemble if they haven't been able to get to the point of finding out if it is useful to them or if it even works on their systems. I certainly haven't studied it enough to even know where and how a grain cloud would even be used. Excuse me, but after spending way more time on this that I would normally under the circumstances, I can't find any grain cloud. I found the grain delays, but that's the closest I could get. I also don't personally use grain-anything so I don't know much about them. If the suggestions you mentioned above mean simply, make sure the three MONO buttons and four BYP buttons are activated in the upper left-hand section of the RESYTHER instrument before clicking NAN, I still usually get a Reaktor crash. Once, for reasons I don't know, it did not crash. If you want to be more specific about someone trying something, you might want to spell it out more explicitly. Thanks for your work and continuing concern.
toto le robot
14 years ago
for win users have you try to bypass all filters and set the sampler and grin cloud to mono before pressing nan?I'm mailing native
Der Einmeier
14 years ago
dito, cpu overload and crashes on my 2.4ghz win_xp-pc when switching NAN on :-( what a pitty.
Jens Focke
14 years ago
crash´s with win by switching nan on
Thomas Weber
14 years ago
Hi Erwan, thanks for fixing the sample problem. Just so you know, there's still a Win Reaktor crash when I click NAN. As far as I can tell, I have to have NAN enabled for this to work. Or am I missing something?
toto le robot
14 years ago
OK, I found the problem it was a sampler that I forget there at the beginning of the building,open the structure of resynther you'll find 2 macro plugged to the keyboard but with output unplugged one is call sampler 2,delete the two or dowload this new version.shame on me sorry,sorry.
toto le robot
14 years ago
hi thomas,these are samples of mine but I don't know where it came from I'll check that deeper. karsten hev you press the nan button and as you are a mac user don't forget to enable loops on the property instrument.
Thomas Weber
14 years ago
Erwan, I don't blame you for the crash. It is NI's responsibility that you can't create ensembles that can kill the program. Now, enabling NAN crashes Reaktor. Startup now identifies 13 missing .wav files: air 10 extrait.wav, BONJOUR.wav, BASSE CHEM 3.wav, BASSE CHEM 2.wav, rammstein extrait 1.wav, MONGOL NO VERB1.wav, wales.wav, Bells.wav, HowRU.wav, MRX.wav, Loop.wav, Yorckstr.wav, and AddHarm.wav. Thanks for your trouble and concern for us Win users.
karsten svendsen
14 years ago
i´m on a G5- get no sound at all
toto le robot
14 years ago
paul,select a snapshot,then press restart,the one in red in the screenshot,the sampler needs a gate to make the sample effective and I don't want that in resynther unless you press kb retrig.
Al Watson
14 years ago
correction! there are 5 samples - *piano medium, *piano grave, *bounjour, *bass slap 1, *, *bass slap 2
Al Watson
14 years ago
all samples missing on download.....:-( looks ace tho............
toto le robot
14 years ago
thomas and allen, I'm sorry for the crash, I'm on mac.I open it again and I only have five samples in the ensemble,so could you tell me what are the name of the missing samples?I think the crash is due to an event loop in the filter section,but I just have audio loop, no event loop, as you can change the order of the filters,that's why I put the instrument to loop enable on.download this version the nan instrument if off so the ensemble is off.press the nan button to run the ensemble,and if it works set resynther to loop enable on.it should work.please tell me if it's better,I'm not sure you'll be able to use well with the loop enable off?please tell me as I'm thinking of buying a pc laptop specially for this one.
Warren Allen Somerlot
14 years ago
yes- the ensemble crashes for me as well (reaktor 4.1.3, WinXP sp1) ..loads ok and then about 5 seconds later--crash! really would like to give it a go, but it doesn't seem to want to cooperate!
Thomas Weber
14 years ago
I meant to say it immediately crashes Reaktor on my WinXP machine.
Thomas Weber
14 years ago
After I cancel out of trying to find the 15 missing .wav files, this download immediately crashes my WinXP machine. This is the only ensemble that I recall ever doing that. Anyone else have the same problem?
Heath Rezabek
14 years ago
heck, i just wanted to give you props for coining the phrase 'cup balrog'. :) -aqaraza
now