16x LoopSELECTOR

16x Loop Selector

(14 Votes)
1.2 (Updated 11 years ago)
15.4MB
November 25, 2009
Reaktor 5 or lower
Instrument Sampler

DESCRIPTION

These are bits and pieces from LoopRippa, Vectory, and BoogleBetaX.

I stripped them down to just what I wanted. Basically you load 16, 2bar loops in each sampler, up to 10 samplers. Use the buttons or XYpad to select the loops.

It works like loop rippa when you scroll the sample select knob. The beat stays in time, but loops change.

This device is great hooked up to my APC40 for button mashing loops and rearranging them FAST!

Nothing to original, but simple and effective.

COMMENTS  (6)

sean witherspoon
9 years ago
this is the great samp/player since hardware camps were created
sean witherspoon
9 years ago
this is old school in a good way
John Durbin
11 years ago
to Richard: You should be able to click "configure" in Live on the VST or AU, turn the knob, and then automate. If not maybe check to see if the knobs "activate midi" is ticked. Should work.
RICHARD CHRISTY
11 years ago
Lots of fun. Thanks. Is there a way to hook up the selector knob to automate in Live? I'm a reaktor noob. I looked at the properties but couldn't see a simple "make it VST param automatable" switch :)
John Durbin
11 years ago
One more thing. If you want to use the XY instead of the 16x buttons, you have to go under the hood and connect it to the samplers select input, as opposed to the knob. Running the 16x buttons to the knob seemed to work better than just the buttons for some reason. I used to have a switch to change between XY or buttons, but lately I just use the buttons and not XY selecting.
John Durbin
11 years ago
I added 2 loops from a group of 16 classic funk loops under the MP3files. I was hoping to upload all 16 plus the map. I dont think the ens. will be rock ready after downloading. You may have to add you own loops. So to get an idea of length and size of loops I add the 2 MP3s
now