LA COMUNIDAD REAKTOR

Works brilliantly in Ableton ... thank you. It's just what I was looking for.

I can't manage to use it in Logic, any idea?

thanks so much for posting this.

Thanks so much for this great module! Maybe you or someone can help me with a patching challenge using this Block and Michael Hetrick's 8 way switch. or maybe there's a bug. I'm trying to chain three Bento Box 8 Steps in series such that a single clock plays 8 steps from Sequencer A, followed 8 steps from Sequencer B and finally 8 steps from Sequencer C. I'm routing the clock into a clock divider, followed by the 8 way switch set for 3 steps. Gate outputs 1, 2 and 3 of the divider are set to 1 step and routed to inputs 1, 2 and 3 of the switch respectively and then onto the respective gates for each of the 3 sequencers. Gate 4 from the divider is set to 8 steps and routed to the switch's gate input. Gates 1, 2 and 3 of the switch are routed to the reset input for Sequencers A, B and C respectively. I'm routing the sequencers' gate, pitch and velocity output to your MIDI Out module. Overall, the patch works fine, except on the clock tick whenever the switch changes clock routing to the next sequencer every 8 steps. Whenever the switch changes outputs, the gate for the first step of the sequence lasts two clock cycles such that the first note of the sequence lasts twice as long as it should. If I disable the first note of each of the 3 sequencers, then the second note plays correctly. If I replace your MIDI Out module with a VCO+ADSR+VCA, then the entire patch works correctly. Can you look into what might be happening here?

An updated version of this can be found here: http://www.native-instruments.com/en/reaktor-community/reaktor-user-library/entry/show/9791/

thanks for answer (danke für die antwort :) , This is a pity :( i was hoping that it works like ableton. hmmmm "mr. and mrs Native Instruments" can you change that for me :) like a button where you can adjust, from which midi controlled. say: reactor controlled midi to ext.Hardware, Start/ Stop from Machine (Studio), Hardware Audio to Maschine Input.....and record themin / with Maschine. that would be the hammer :)

@MPad, you can't route MIDI from one plugin to another in Maschine.

reactor standalone works with midi out to eurorack, but when i try maschine 2.4 and load reaktor as a plugin :( Does somebody has any idea? have tried many things: maschine midi out, reaktor connections.......it does not work anyway mhhhhhhh :(

Velocity now works thanks to Emm@ Em.

Sorry, sorry, need to clarify the below because my less-than symbol won't show up in this editor. For velocities less than 50, gate is shut off. For velocities over 50, gate passes normally.

Actually, it looks like the Gate and Velocity inputs affect each other, such that velocity simply subtracts from gate. Say (for example) you have a sequence of 8 steps, all gates On, for any step for which velocity is set 50, gate passes through. In no instance does the DAW receive a velocity other than 100% or 0% – it's binary On/Off. Very curious about how to fix this, because in other respects it's a great help.

Am I crazy or is this not capable of capturing/sending MIDI velocity? Can't get that to work. Any ideas?

thanks a lot!... using it to send MIDI trough SQ-1 (MIDItoCV) to modular-synthesizer...works fine!

Thank you!

thank you thank you thank you!!!!

Thank you Phil!