Separate names with a comma.
Looks like you've answered your own question. :) Get an S4 and upgrade the crossfader to a mini Innofader PNP P.
I did it myself a few times. Removing faders from a PC board is not an easy soldering task. If you went this route I would strongly recommend you...
Yes it is
No. On the S2 all of the faders are soldered to the PC board so the mini Innofader PNP S is required. Since you don't want to do...
We have posted the calibration procedure here:
Please try this.
Please check this thread here first:...
Audio Innovate can supply the mini Innofader PNP S as an upgrade replacement part for the standard channel faders.
We can also help you locate...
You can order from here:
Thanks for the feedback!
If you are interested in the PNP S for your S4 channel faders please let me know!
Please read our forum here:
The calibration is permanently stored in EEPROM memory so it should power on the same way. When it's working how tight are you making it? Because...
You mentioned "I have done everything except hardware calibration." There you go!
Please check this thread first:
OK I've been called on this forum.
Yes if you push HARD down on the mini Innofaders the volume will change. This is since in order to get the...
Cool glad we got this all worked out!
Could you please email me some details on this so I can follow through on our end?
Sorry you've had such a string of bad luck with this. I will correspond to you via email and get this wrapped up for you.
It seems to me the mini Innofader itself doesn't have enough dead space so the main piece needs to be recalibrated. I'll send you an email about...
The rev. 5 on the PC board just means the PC board is the most recent. But again this is not the issue. The issue is related to the sensor element...
@space dust: Please write me firstname.lastname@example.org and I'll help you get this straightened out right away. - Elliot
You'd have to keep recalibrating until the cut points start working on both sides. The mini Innofader calibration does a sensor level adjustment...
Yes XF curve will still function with the PNP as long as the PNP has the curve setting close to the 12:00 position factory default setting.