2.6.5 Sample rate error.

Hi,
Since I did upgrade to 2.6.5, appears this error with just 2 or 3 Kit inside.
I'm working with Apogee Duet 2/96000.
Any suggestion?
Thx
S.

 

Sounds more like Logic issue. What OS?

 

IMO this is a clock (soundcard/driver) issue.

Apogee seems to be failing syncing the clock.
Try this:
Create an aggregate device with internal soundcard and select internal input or output as master clock:




You can still use Apogees in & out inside Logic, only master clock will be generated by mac itself.

 

Hi alpert,
Thanks for reply.
Can you please explain me how to create an aggregate device and after, Changing sample rate in Apogee control pannel will affect also internal clock?
I'm expering very hi-cpu usage just using 1 or 2 kits from this upgrade, currentaly is still unusable for me, anyones have the same problem with logic?
Regards.
Steve

 

You did not respond to my question about the OS you are using. The latest Maschine 2.6.5 is not compatible with OSX 10.9

 

Sorry, 10.12.5.

 

To create aggregate device, click plus sign on the bottom left of Audio-midi-setup/Audio devices.
Be sure Apogee is connected when you do this.




I havent asked but assumed, you have latest Apogee drivers and uninstalled/reinstalled it right?

Also while updating/installing maschine software, was maschine hardware connected? That causes errors.
If it was, uninstall reinstall maschine when maschine is plugged off.

I didnt see CPU spikes with Logic-Maschine VST. Not more than 2.4 at least. (im on 10.11)

 

I have tryed to unistall reistall the drivers and also maschine sw but nothing...
Here seems that my view of audio midi conf. is little different maybe because i'm on Sierra.
It look like this:


Do i have to select drift correction?
Thx
S.

 

You shouldnt need to click drift correction.
From Stackexchange:
"If your aggregate devices all support word clock, then you don't need software drift correction - the master will be used as a word clock source and the word clock data will be sent to the other devices. They'll all use that clock to keep themselves in sync. Otherwise, any devices except the master which don't support word click need the drift correction switch turning on. "
https://apple.stackexchange.com/que...ft-correction-on-os-x-and-how-should-i-use-it

In audio midi setup enable Apogee, too (click left box)
Select same sample rate with internal and duet.
is Logic still throws that odd sample rate error?

 

Ok, thanks for the detailed explanation, my only doubt is which audio interface i have to select inside logic now?
Apogee or Ggregate device?
Many thx
S.

 

There arent too many, try different combinations and see if one of them solves the problem..

@djsteves , i am only suggesting what i would do in same situation. It is trial and error.
I am not %100 sure if this will solve the problem.
I've never seen same problem with my system, but this would be what i try first if same thing would have happened to me..

My logic (no pun intended) is: Logic Pro is whining about syncronisation, so i give that task to computer instead of soundcard. I hope it works. You cannot know if you dont try

 

Thx alpert, i will try very soon

 

If it works (or not), please write your feedback here.