A couple of pointers ...

The Channel-Meters - that weren't meant to be "there", either move them next to each other and
spread them out (deck height) to have a visual reference - or -
make them horizontals (mirrored) middle-out.

I never understood why they were added like "there",
instead of - in some relation to the Fader or the deck-height ..

-> Sub-Option/Switch to "Initially Cue to Load-Marker" -> Cue to Gridmarker/Downbeat if no Load-Marker

- New Tracks Found Pop-Up onLoad (Analyse)
-> Option: Create Auto-Load Marker automatically,
if "Set Beatgrid is checked"
-> save&use THESE settings (dont ask again - jeez)

- 3/4 3/8 .. Delays and Loops (yes .. thirds)

-> a "Deadzone"-Marker to mark the virtual-end of a Track - Everything beyond is silence or negative.

-> Indicators/Positinal Highlights (weights) for 9th (after 2bars), 17th (4bars), and 33rd (8bars) <- would be extremely useful...

.. regards

 

sorry, but I didn't understand some things
Channel-Meters - is it about this?


-> Sub-Option/Switch to "Initially Cue to Load-Marker" -> Cue to Gridmarker/Downbeat if no Load-Marker
Why make the first сue in a track as a grid-marker? the grid can be adjusted in a separate grid tab

- New Tracks Found Pop-Up onLoad (Analyse)
-> Option: Create Auto-Load Marker automatically,
if "Set Beatgrid is checked"
-> save&use THESE settings (dont ask again - jeez)
What does this mean?

-> Indicators/Positinal Highlights (weights) for 9th (after 2bars), 17th (4bars), and 33rd (8bars) <- would be extremely useful...
What does this mean?

 

the last one is a really good suggestion, i've often wanted bar-based instead of time-based markers on the stripe

 

Why make the first сue in a track as a grid-marker? the grid can be adjusted in a separate grid tab

Because a beatgrid has to have a marker - a downbeat.
That grid-marker (the first beat sometimes) could save
setting an additional "Load-Marker" ..
The Position the Track is "Loaded-To", hence "Load-Marker"
Traktor does have the Option to "Set to Load-Marker",
but not "Set to Grid-Marker" which (like i said) sometimes
is the right point .. but 19/20 the Track isn't cut properly
and Traktor just loads the Track ending up in-between beats.
... Setting a Load-Marker is a manual task (or macro, but still)
and could be easily integrated (if wanted) with:
"Also create Load-Marker" if "Set Beatgrid" is checked.
If not - then whatever.
It would save A LOT OF TIME having not to set it manually.


Channel-Meters - is it about this?
Yes, Sherlock - "Them"
They have no business or logic for that matter being in that position.
They (both) belong next the Ch-Faders, at least the base should be
down there.

-> Indicators/Positinal Highlights (weights) for 9th (after 2bars), 17th (4bars), and 33rd (8bars) <- would be extremely useful...
What does this mean?
It's a DJ-Thing .. if you don't get it, sorry.

- New Tracks Found Pop-Up onLoad (Analyse)
-> save&use THESE settings
What does this mean?
So the Pop-Up would stop popping the izzup,
annoying me every time i add Tracks?
Like the "Don't ask me again"-Checkboxes?

 

Just so you know, none of us here are real djs and hopefully when real djs come around here you’ll get a pat on the back for your pointers.

 

About odd numbered loops: I've added this to my free ddj-1000 map
Idea taken from the cdj-3000

 

+1
It could be with fade-out on request.