A switch with GATE-buttons?!

Hi,

Sorry for my bad english... :/
How can I realize a switch with individual GATE-buttons?
I tried it with IC send, but this worked not correct!
The problem is I have to click 2 times on the button.
1 time to switch off all other buttons and 1 time to switch on the current button.
And sometimes I received an error (event-loop..blablabla...)
What is wrong?
Is there a better way to realize this button project?
Please check my ensemble!
Thanks!!!

 

Hello....

I THINK the problem your having is the low value of the buttons are triggering a zero into the IC sends. I'm not 100% on this but if the range of the IC send is Min=0 and Max=1 anything below zero will trigger a zero from the IC send.
I've attached a file which uses a seperater to filter out Low button values and the high values trigger a zero into the IC sends (set up the same way as you had). I havent yet figured out a way to stop deactivating a button if you press it twice (which wouldnt happen with a switch where theres a button that is always active).

Hope this helps

 

Hello,

aaahhh...yes!
The negative value was really the problem.
Your attached ensemble works brilliant!
The other thing with stop deactivating... is ok.
Thats no problem!
Thanks for this!