Assignment Control in Traktor Pro for Traktor Kontrol X1 in NHL Mode

I change the mapping in my Traktor Pro 1.2.4 for my Traktor Kontrol X1 in NHL mode.

I assigned;

Add in - Deck Focus Select to "Norm.Left.FX1"
(Button, Direct, Global, Set Value to Deck A)

and

Add in - Deck Focus Select to "Norm.Left.FX2"
Button, Direct, Global, Set Value to Deck B

How do I have to configure the "Add outs" for "Norm.Left.FX1" and Norm.Left.FX2" in order that if Deck A is selected, the button FX1 on the left is lighted and once I push FX2 on the left, button FX1 is put out and FX2 is turned on?

Hopefully somebody can help me or even better tell me were I find the manual for the mapping. Thanks.

 

I've made following in midilayer (on cc-adresses) and have not yet studied the native layer but i guess it would be same procedure:

Add out > View > Deck Focus Select
Device mapping: "Norm.Left.FX1"
Led options: Controller Range > Min0 Max0 (corresponds to only Deck A), No Invert
Led options: Midi Range > Min0 Max127, No Blend

Normally the led controller range is most often 0-1 as in OFF-ON, but for Deck Focus Select it's 0-3 as A to D and now from knowing that we have 0-0=A, 1-1=B, 2-2=C, 3-3=D. So for "Norm.Left.FX2" use Led Contoller Range 1-1.

I hope now this applies in native layer.

 

In midi I'm able to change the values of the led options with the Controller Editor, but unfortunately I haven't found out, how to change it in NHL mode. In the Assignment Table of Traktor Pro they seem to be locked.
---
I found it out myself. One has to double click on the value within the Assignment Table of Traktor Pro. The proposed set-up does work. Thanks for the help.

 

Thanks Orjan, I was looking for that exact same thing.