Audio 6 DJ with 3 CD decks?

hello everybody,
just wanted to ask you if its possible to play with 3 cdjs through timecode when i use audio 6 dj, or is that only possible with 8 and 10.
thank you !

 

cummon?

 

technically its possible to have 3x cdjs or 2x turntables(A&B) and cdj(main) connected for DVS but you need Traktor Scratch Pro (Pro 2) as Traktor Scratch Duo only allows for 2 decks and Traktor Scratch Duo II for 2 Track Decks + 2 Sample decks
hope this answers your question

 

Hi guys, could you help me? I am not able to route a signal using the "main" input/output on my audio 6 dj.....i dont know why....

When i plug the RCA cable on the "main in" the green led IN is on, but there is nothing at the "main out", the green led OUT is off...

I am using Tracktor Scratch Pro 2, and i have routed the A deck: input routing = main left and right.... output routing: main left and right so....what's wrong? maybe my audio 6 dj is not working good?.

And, another small question, can I use Thru mode with main in/out?.

Thanks.

 

do you have timecode cd in deck a and do you have track loaded, are you in abs or rel mode? if all are yes then it should be working fine if not check if you can output from main out from internal mode

Only A & B have the "Direct Thru" however you can use the live input

 

lots of thanks TO6KO91

After some time testing here are the results:

The "main output" seems to be working good but, I only tried with the internal mode as you suggested, and it works.

I still didn' t try with control cd's...it will be the next step.

And, sorry but I dont know what u meant when u said: "are you in abs or rel mode?" I dont know what it is and of course I dont know what to use it for, could you explain to me?.

And thnx a lot again, ur help was useful.

I will post here again with the final result. I will try with cd´s soon.

 

by abs and rel I meant absolute and relative mode (the ways you can control timecode)