CDJ 1000mk3 and DJM 800

I recently purchased this set of pioneers as I was wanting something to do during lock down. I used to have Traktor Scratch a6 a few years ago so thought I would be able to just set it up and play but I cannot set it up for toffee. I think the problem might be that on set up it asks me what external controller I am using and my cdj does not appear. I have attached a picture of what I can see. Can someone please help me

 

I may be wrong but I think you need to have either an external soundcard or a Traktor Certified mixer/controller. I'm assuming you have the timecode in the CDJs?

 

with TP3 any mixer is supported for DVS
that wizard is just for HID control of the other buttons
1000MK3 is not suported, so you are using this exactly like a turntable

 

So should I just ignore the setup wizard then. Should I just connect the phono cables from my cdjs to the traktor audio card then from there to my mixer. The setup is really confusing. Thank you for your time

 

I bought the A6 in the box brand new so it came with the sound card. I guess the sound card is that silver box that you plug in and connect phono leads to.
Please bear with my amateur needs

 

You don't have a controller, so just select No in the first step.

 

thank you very much that worked.
Now there is another problem. All my tracks sound like they are high pitched. I have looked through previous threads but I cannot work it out. Its all plugged in correctly as far as I can see. What would be the problem for it.

 

Is the A6 set to Line input? https://support.native-instruments....NO-Input-Level-with-a-TRAKTOR-Audio-Interface

 

I can't select the menu. It just flashes blue and nothing else pops up