1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE
NOTICE:

Our Traktor Pro Public Beta is available again in our new online community. Join us if you want to try new features.

MORE INFO

CDJ 400 + DDM 4000 + Traktor Pro

Discussion in 'TRAKTOR PRO / TRAKTOR SCRATCH PRO' started by DeeJay Jass, Jun 22, 2010.

Thread Status:
Not open for further replies.
  1. DeeJay Jass

    DeeJay Jass New Member

    Messages:
    3
    Hey guys, I've scoured the internet looking for a way to connect my CDJ 400's, DDM4000 and traktor pro all together.

    How I'm aiming to do my set up is having traktor pro running with the 2 cdj 400's connected in HID mode and my ddm4000 connected in midi. So far the only thing ive been able to do is to get the 400's connected in HID and just run them straight into the ddm4000 as a external mixer where its not connected to traktor. I Want the ddm4000 to control traktor as the mixer and not controlling decks.

    Does anyone know if its possible without buying one of those soundcard thingys? I do have a DJ/IO lying about somewhere if that helps.

    Cheers in advance guys.
     
    DeeJay Jass, Jun 22, 2010
    #1
  2. TeLLy

    TeLLy NI Product Owner Extraordinaire

    Messages:
    6,449
    I don't see a USB MIDI port on the back of the DDM4000, so I think if you want MIDI from that mixer you'll need to pick up a USB-MIDI interface. The DJ/IO doesn't have one either, does it?
     
    TeLLy, Jun 22, 2010
    #2
  3. chachakoala

    chachakoala NI Product Owner

    Messages:
    449
    You have to use a USB midi interface then plug thé USB midi out to the ddm400 midi in and vice versa
    You also have to configure the mixer and if needed the decks as midi in the console preferences
     
    chachakoala, Jun 22, 2010
    #3
  4. DeeJay Jass

    DeeJay Jass New Member

    Messages:
    3
    To clarify the DDM 4000 does have a midi input/output and I do have the midi to usb cord. I can plug them all in however I cant get traktor to recognise them all. Or I'm not sure how. i seem to only be able to select either the 400's or the ddm4000. Not both. Im sure you can I just dont know how.
     
    DeeJay Jass, Jun 23, 2010
    #4
  5. DeeJay Jass

    DeeJay Jass New Member

    Messages:
    3
    Any Ideas anyone?
     
    DeeJay Jass, Jun 30, 2010
    #5
  6. DiscoNova

    DiscoNova NI Product Owner

    Messages:
    1,207
    Sounds weird. Could you provide further details like your operating system and Traktor version, make and model of your MIDI-to-USB -interface, possibly some screenshots of how the preferences look like with different configuration attempts (ie. only CDJs connected, only mixer connected, all connected) ... these might prove beneficial for troubleshooting.
     
    DiscoNova, Jun 30, 2010
    #6
  7. ps2madboy

    ps2madboy New Member

    Messages:
    10
    did you active the midi on the DDM 4000.....

    go into setup and midi and activate the midi controls....

    Then you can map the controls to work with traktor or get the tsi file for ddm 4000

    i dont use midi on ddm 4000 and i have a X1

    Just feed 4 channels into mixer then 1 back into audio 8 of recording



    Phil
     
    ps2madboy, Jul 23, 2010
    #7
Thread Status:
Not open for further replies.