Crossfader ON the Z2 calibration?

mi innofader says rev 5..... i can post the picture if you like...

the last two i had have the same thing written in them... rev 5...

 

Sorry to hear that you guys had some trouble. If tech support doesn't get back to you in a timely manner, please let me know by posting in this thread and I will hunt down some help for you.

 

The rev. 5 on the PC board just means the PC board is the most recent. But again this is not the issue. The issue is related to the sensor element inside the fader.

Please again read this forum thread and check the first picture to see if you have the old production stem (left side of the first picture) or new production stem (right side of the picture). You can determine this simply by looking inside the slot; if you see circular rivets on the stem then this is the new production one. Without these it's the first production one.

 

sorry elliot but on which post exactly are you refering?? i cant seem to find those pictures you are talking about so that i can check what you have told me ...

thx

 

Hey Muj,

Check out the post here: http://www.audioinnovate.com/forums...er-isnt-working-as-expected-please-read-here/

That's the info you need! Check the pic.

 

thx, will check it out when i get home from work...

 

Cool! Let us know.

 

Elliot,

ive checked with my innofader... It has circular rivets so its the new one...


whats my next step now??

 

@Innofader ...

just for the info, i recalibrated it today with traktor, and for a couple of minutes it was working like before... but after it, it was starting to bleed again like hell... i noticed it now on the stabs ...

so freaking dissappointed

 

It seems to me the mini Innofader itself doesn't have enough dead space so the main piece needs to be recalibrated. I'll send you an email about this matter.

 

ok...please email me as soon as you are available...

thx

 

hello everybody..

i got some guides from @Innofader and i will post my results and what i did exactly to get my mininnofader working, if it lasts for a couple of days without bleeding...

peace

 

I must report that after whole morning of calibration, and all guides ive got to make my mininnofader work again, i cant get it into perfect working mode like it was ...

after calibration (software and hardware) m and combo of those two... adding deadspace... and all that, my mininnofader just starts to bleed after cca 30min of scratching....

the cut in space reduces for about 0,5-1 mm and the dead space becomes minimal, so the bleeding occurs at that point... even after that if i do traktor software calibration it just does not fix the issue, it stays the same...

im very sad .... i really tried hard yesterday and from todays morning till now and i did not stop tryin to fix it... but nothing...

i reported my issue to support in friday, i did not get an answer yet, but, its weekend so i suppose tommorow ill get my answer...

i had a couple of email exchanges with elliot @Innofader who was there with all sorts of advices but we could not get it through with this particular innofader...

love my z2 and my s4 and all native products i had , but this is so freakin drivin me nuts...

exhausted .............

 

Hello Muwu,

Sorry you've had such a string of bad luck with this. I will correspond to you via email and get this wrapped up for you.

Elliot

 

Hi everyone, just want to report that i had recieved for the third time my replacement fader for my Z2.... For now, it works perfect...

Thx to NI Support Berlin and to Elliot for quick responses...

Hope you guys at support receieved the faulty innofader that ive sent you!

peace and love

muwu

 

Hello muwu,

Cool glad we got this all worked out!

Could you please email me some details on this so I can follow through on our end?

 

Hello everyone, so I am having this issue again for the second time. I got a replacement fader last year around this time for the bleeding issue and sure enough after about the same amount of use it happened again. I am sure NI will take care of me and I sent in a Support ticket, but my question is what is the best option to make sure this doesn't happen again? Should I get a new Innofader myself? If so, what would be the best option to go with and what would be the most economical option to go with? I would rather be 100% percent sure this won't happen again then take a 95% chance that it will.

 

Please check this thread first:

http://www.audioinnovate.com/forums...er-isnt-working-as-expected-please-read-here/

 

Ok, so I have the Rev5 mini innofader with the circular rivets. I have done everything except hardware calibration. What is my next step? The software calibration is a bust.

 

You mentioned "I have done everything except hardware calibration." There you go!