Filed CRUISE MODE bug - track pointer not updated

CRUISE MODE bug - track pointer not updated

DESCRIPTION:
D1 - Create or open an arbitrary playlist (for example a complete CD album) under the Traktor collection node.
D2 - Load track #5 (for example) into deck A.
D3 - Load track #6 (in this example) into deck B.
D4 - Start PLAY on deck A.
D5 - Activate CRUISE MODE.
D6 - Move an arbitrary track ABOVE track #5 (in our example) to anywhere BELOW track #6 or delete this track from the playlist.
D7 - After tracks #5 and #6 have been played successfully, track #7 is omitted. Instead of track #7, track #8 is loaded into deck A.

Alternatively:
D6' - Move an arbitrary track BELOW track #6 (in our example) anywhere ABOVE track #5.
D7' - After tracks #5 and #6 have been played successfully, track #6 is played twice. Instead of track #7, track #6 is loaded again into deck A.

COMMENT:
C1 - It seems that the pointer which indicates the position of a track within a playlist is NOT updated after moving, deleting or adding of tracks when CRUISE MODE is active. Therefore, the wrong track is loaded simply because the new track position within the playlist has not been updated.
C2 - A CONSOLIDATE (before or after moving, deleting or adding the tracks) does not solve the problem.
C3 - The error occurs in all playlists in the Traktor collection (not only in the preparation list).
_____________________________
Traktor Pro 2.11.3 (R12) BETA
MacBook Pro 17" (Intel Core i7 @ 2.66 GHz | 8 GB DDR3 | macOS 10.13.4 High Sierra)
RME Fireface UC (firmware rev. 123 | PnP driver 3.03 | DIGICheck 0.71)
RME Babyface Pro (firmware rev. 101 | PnP driver 3.03 | DIGICheck 0.71)
NI Kontrol X1 & F1 (driver 3.0.1 (R648) | controller editor 2.2.2 (R286))
EKS Otus (firmware 1.5 | MIDI driver 1.5 / 1.18 | ASIO driver 1.13)

 

Issue has been filed as TP-12790. Thanks for the report.