feature suggestion for S4 - MK3 !!! :))

Discussion in 'Feature Suggestions' started by djdjasic, Nov 5, 2018.

  1. djdjasic

    djdjasic New Member

    Messages:
    7
    Mixer Fx's To Be Post CROSSFADER !
    i know they are post fader - but if they will be post CROSSFADER too it will be great !!!!

    thanks !!!
     
  2. zephry

    zephry NI Product Owner

    Messages:
    1,951
    I've never heard this term?
    What is post-crossfader?
    Wait never mind, you mean the crossfader not just the line faders, right?
     
  3. Karlos Santos

    Karlos Santos Rocket Man Moderator

    Messages:
    12,037
    I've also no idea what this means, why or how it could be used or implemented.
    If FX were post crossfader, the crossfader wouldn't work. The whole point of the crossfader is to act like a switch to cut of the channel.
     
  4. djdjasic

    djdjasic New Member

    Messages:
    7
    LET ME EXPLAIN GUYS :)
    Example : lets say u scratch on one deck - and you want to put a Reverb From the mixer fx's on the sample that you scratch - when you cut the sound off with the crossfader - the reverb also will be muted - SO - if the mixer fxs will be post crossfader - that mean the crossfader will still cut the sound - but not the effect ! the tail of the reverb will continue to be heard ... !
     
  5. Karlos Santos

    Karlos Santos Rocket Man Moderator

    Messages:
    12,037
    Yeah, that's exactly what I thought you wanted to achieve. The crossfader is generally the last part of the chain before the output stage.
    I have no idea if this is possible.
     
  6. djdjasic

    djdjasic New Member

    Messages:
    7
    i'm not sure if its the last part of the chain .
    in Z2 mixer for example - the Reverb t3 for example from traktor main fxs - keep working also when the crossfader is off
     
  7. bohlrocka

    bohlrocka New Member

    Messages:
    8
    +1 - Effects on other gear always work post fader, even crossfader
     
  8. Stevan

    Stevan NI Product Owner

    Messages:
    858
    Hmm map your Channel faders to the crossfader :)

    (second one should come inverted of course)
     
  9. bohlrocka

    bohlrocka New Member

    Messages:
    8
    Stevan, can you explain your idea? I don‘t get you.
     
  10. Stevan

    Stevan NI Product Owner

    Messages:
    858
    Use command from:

    Add In --> Mixer --> Volume Adjust

    Midi learn it to the crossfader and assign it to deck A.

    Than duplicate this command, re-assign it to Deck B and finally click on "Invert" under the button options.

    This is just a thought. I need to test this in practice too.
     
  11. Cheef Roberts

    Cheef Roberts NI Product Owner

    Messages:
    74
    Should this be moved to the S4 feature suggestion section? This is for software suggestions, not hardware.