Fully standalone MASCHINE LCD MOD

Discussion in 'Feature Request Archive' started by Emdeka, Nov 27, 2014.

  1. Emdeka

    Emdeka Member

    Messages:
    18
    Hi Everyone,

    I would like to introduce my new mod of my MASCHINE MK1. Now I add 5,6" 1280x800 LCD with vga controller and make cabinet for this LCD. Below is the link for his LCD:

    http://www.adafruit.com/product/1666

    As I said in my last post, my MASCHINE is fully standalone, it has built in battery, laptop mainboard, HDD, and 4IN/4OUT audio interface with headphone amp. After LCD mod work on my maschine step to the next level. Cost of this mod is about 200$ (7" LCD is cheaper, but it's to big I think). If somebody is interesting how my MASCHINE looks now, here are some pctures.
    Enjoy!
     

    Attached Files:

    • Like Like x 5
  2. AL’DREAD

    AL’DREAD NI Product Owner

    Messages:
    4,588
  3. Disco-in-my-punk

    Disco-in-my-punk NI Product Owner

    Messages:
    53
    thats pretty awesome -good on you
     
  4. b-righteous

    b-righteous Moderator Moderator

    Messages:
    9,677
  5. C.T. Blaze

    C.T. Blaze Member

    Messages:
    54
    Most excellent!
    May I ask which laptop board you have used? (specs)

    BTW, I'm thinking about using the NI Maschine stand as a case for the additional hardware.
    Micro-ATX with pico PSU should fit, right? This could even run an i5 or even i7 (S version for less cooling efforts),

    But how can you see details on that little screen with the relatively high resolution? DPI is too high for my taste.
    I would go for 7" or 9" or even 10" touchscreen with Win 8. But no budget for this kind of project, so I keep dreaming on... ;)
     
  6. jlmo

    jlmo New Member

    Messages:
    5
    Hello, what do you mean by "fully stand alone" ? is there a computer under the mk2 ?o_O
     
  7. Bonus Beats

    Bonus Beats NI Product Owner

    Messages:
    2,412
    ill buy it
     
  8. Witzman

    Witzman NI Product Owner

    Messages:
    96
    • Like Like x 1
  9. jlmo

    jlmo New Member

    Messages:
    5
    thanks ;)
     
  10. Emdeka

    Emdeka Member

    Messages:
    18
    You could use Ni Maschine stand, but in my opinion it would not fit. Maiboard and PSU and heatsink will be too big. And there will be no way to use battery:D
     
  11. Pesict

    Pesict NI Product Owner

    Messages:
    609
    you Sir, deserve a medal!
    nice work!
     
  12. kptrips

    kptrips New Member

    Messages:
    7
    Yes - this is beautiful.. Well played.

    Great work.
     
  13. Emdeka

    Emdeka Member

    Messages:
    18
    Fresh stuff. New internals, wooden sides etc. Works perfect.
     

    Attached Files:

    • Like Like x 1