Grid settings LOST when editing track info!

Hi,

It's been a while since I've used traktor, stocked to get back into it again!

Updated from 1.01 to 1.26

When I'm preparing a track for use in traktor Ifirst load it up, go to 1st beat, cue, store cua as load and then check the grid. Usually I make some adjustments to the grid placing and/or tempo, then I listed through the track to put a description in track info. When I change anything in track info, like bpm or comment or rating, the grid I just fixed is lost! Even when I had put a lock on it, it goes back to the way it was loaded!

This means I have to do it all again, the gridlock is gone along with the grid spacing and place etc.

Is this a known bug?

Using XP sp2 btw

Thanks for any help, this is frustrating as I'm sure you can imagine...

Just

 

you mean: change into a grid marker, right?

are you sure you're editing from below the track collection node and that the track has been imported?

atm this sounds like a user error to me since there is no similar bug known to me.

 

i had a similar problem, it turns out that the problem was the mp3s themselves, what i had to do is right click on the mp3s that were giving me problems, go to properties, and "read only" was previously selected, all you have to do is unselect it. i hope this helps, if it is what the problem actually is.

 

write protection... good call