Guitar Rig on Mac

Hello Guys!

First, sorry my bad english...

I need a help.

I'm trying to use the Guitar Rig 3 in my iMac. I also use a external soundcard, TASCAM 122L. But after installed the Guitar Rig, i can't use my TASCAM, because in the guitar rig's interface window, i only can see CoreAudio in the Interface field. I can't change this. I only see my TASCAM in the Output field.

So, how Can I use Guitar Rig with my TASCAM in the iMac?

Thanks you guys!

 

Do other programs see the Tascam? I have a US 144 and I know that I had a lot of latency troubles until I flashed the firmware to the latest version and used the same version of driver on OS X. So check that as well...

Good luck.

 

Make sure your Tascam drivers are up to date. Have you updated it since you bought it? Macs will see anything plugged into them.

EXCEPT when the device is old.

 

Welcome =)

Aggregate devices are your friends. Go to your OSX audio/MIDI settings and create an aggregate device consisting of your Tascam's ins and outs. Now, use the aggregate in GR.

ew

 

Viv Savage

Yes, I can use the TASCAM inside the GarageBand. So I can use the Line In and the Midi In

------------------------------------------------------------------------------

JayT

I had update the TASCAM's drivers to the Last version.

------------------------------------------------------------------------------

ew

Sorry man but, How can I exactly do this aggregate device?
I opened the Midi Setups' window. There I have my default settings where my TASCAM is listed. Do I have to create a "New Configuration" in the configuration's Combo Box?


Thanks again guys!

 

Go to audio/midi setup (In your Utilities Folder) and select from the menu "Create Aggregate Device).
Press + in the menu that comes up. Name it Guitar Rig or whatever you want. Check in the "use" column the Tascam's inputs and outputs.

Hit done, open Guitar Rig and choose the aggregate. Done.

ew