Hardware drawbar control?

What hardware B3 emulators are good for controlling B4? Something with drawbars and switches for the leslie, not knobs. I read that the Roland series does not do a good job. Any suggestions to try or stay away from?

Robert

 

I think that at this time there is not a dedicated controller, I heard ppl using b2 or cx3 or vk7 etc to control B4, but...
if ur good enought at electronics u could try this link:
www.ucapps.de, and let me know if u succeed

bye bye

 

I use B4 with a Tascam US 428 and I feel comfortable with it, it's not too expensive. For the Leslie I use the modulation wheel on the left of my MIDI Keyboard, it gives me a feeling close enough to the real thing.
Cheers,

Cédric

 

You will find templates on the B4 CD for the Kenton Control Freak and the Peavey 1600x which are also working fine for controlling the B4. But of course, you can use any MIDI controller which is sending standard CCs. Since the B4 has a fixed controller value for each parameter, we strongly recommend a programmable controller where you can assign CC numbers to any knob/fader. Generally faders are more useful than knobs when used for the B4 drawbars.

Best regards
Marius Wilhelmi (NI)