1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE

Keyboard split with mono gate

Discussion in 'Building With Reaktor' started by KoaN, Dec 14, 2015.

  1. KoaN

    KoaN NI Product Owner

    Messages:
    266
    Hi guys,
    I'm using a mono gate and i'd like to split my keyboard in two section....below C3 and above C3.
    So i want the mono gate to have no activity if a key above C3 is pressed.
    Untitled.jpg
    The problem with that structure is if i hold a key below C3 and at the same time i press a key above C3 the gate returns to zero and i loose the "note off" signal when i release the key below C3...ending with a hanged note.
    Is that possible to forbid a mono gate to have any activity whatsoever above a certain key?
    I know there are single note trigger gates...i tried merging all the keys below C3 together but that brings another problem...there's some spike in volume when 2 keys are pressed close together "think legato style".
    I'm not sure what to do with this.

    Thanks.
     
    KoaN, Dec 14, 2015
    #1
  2. KoaN

    KoaN NI Product Owner

    Messages:
    266
    Oh well i just found a solution 1 minute after i posted this...hehe.
    Insert a mono gate into an instrument container,and change the higher limit from the options.
    Monophonic signal from an instrument can be connected to another instrument so...all is fine!

    :)
     
    KoaN, Dec 14, 2015
    #2
    • Like Like x 1