Load loops from any deck into sample deck in 3 track/1 sample deck mode w/ hotkeys

Aloha,

I find myself using 3 track deck/1 sample deck mode the most and what I would like to be able to do is load a loop into the sample deck from any deck using the sample deck hot keys.

Example:

Decks A, B, D are track decks. Deck C is the sample deck.

I have a track playing Deck A, and have a loop going in Deck B. And I just want to be able to hit the sample deck buttons on the Deck A side, but have it load the loop playing in Deck B. Traktor should be able to recognize that a loop is playing in Deck B and load that instead of trying to load the track playing in Deck A only to have it say song is too large.

I hope that makes sense.

Thanks!

 

press and hold the browse button. now all buttons flash where a loop can be loaded from. Press the Cue button of the deck where you want to have the sample from. Then all sample slots that are capable of loading the Sample will flash. Just press your sample slot and then the sample is loaded.

You will find this in the manual ;-)

 

Thanks!

I must have missed that section

 

Alright! I got confused at first with the 2 browse buttons.

The loop loaded but now the problem is the loop doesn't auto play like it does if you load the loop directly using the hotkeys. And I have to manually trigger the loop to play.

I looked through the manual and preferences and did not find any reference to a setting I could adjust. So maybe that's a suggestion?

Thanks again Hetch!