Maschine Export Problem

Hey guys, new here and thankful for all the tips I've already received even without posting. With that being said-
I'm having a little difficulty figuring out what's wrong with my export .wav . I've exported one file successfully, and was able to send it to friends. The track I actually want to send plays for about 5 seconds after export, then cuts off. Things I've tried:
1. Adjusting the latency.
2. Lowering the master track volume.
3. Different bit rates
4. Normalized/not normalized
Is there anything else I can try? My other track exported pretty much perfectly, and I did not have to change any settings at all. Any help would be appreciated. Thanks in advance guys.

 

Have you first selected all the Scenes that you want to be included in this exported file?

 

Yes, I have. Thanks for the suggestion.
The answer ended up being incredibly simple, I just had to lower the sample rate.

 

Really? What were the previous and working settings? Which sample rate worked?

 

I started off with what I assume were the defaults....or maybe I changed them due to not fully knowing what I was doing The sample rate was at 192000hz, and the bit depth was at 32 bit float. Both of those made for an extremely large audio file. I lowered the sample rate to 44100hz, and obviously the bit depth as well- to 16. Worked like a charm. I'm still concerned though, since those other settings ARE actual options, and aren't working. I'm going to experiment with other bit depth and sample rate combinations as well.