maschine HSB mappings

Traktor 2.10
Maschine MKII
Controller Editor 1.9.0

just redid my mapping following Paul Shpakov AKA Mapping Genius' HSB guide- now my hotcues give me color feedback based on cue type- I also have pads mapped to the loop active button that flash when there is a loop active and the deck play pad changes color when deck is playing-



I still need help me with a couple of things:


1) Cue colors for empty queues reset (right now all empty queues pads default to blue/cue when a track is loaded) how do I make them white when the slot is empty?


2)how do I make two pads behave like the Play/Cue buttons on CDJ's?


on CDJ's the CUE (orange button) is solid when the needle is over a marked cue point (not hot cue) and blinks when the needle/marker is over a region that does not contain a CUE marker if you press CUE over that region while deck is stopped it puts a marker and resets it as the current CUE point and if you press during playback it rewinds track to CUE point


play (green button) blinks when a track is loaded and deck is stopped and goes solid when playing...


both buttons grey out when no track is loaded


this video has a really good walkthru on CDJ CUE/PLAY behaviour and you can see the light feedback



3) when a loop is active how do I make that pad blink to indicate that the loop is active
IE: pad # 4 = hot cue slot #4 deck A on some tracks cue #4 is a loop and in some it's a cue point... how do I make pad # 4 blink only when the slot is a loop and then only when the loop is active- the pads are mapped with HSB that give me matching feedback color from what the deck hot cue slots are displaying