[Maschine/Traktor/Live/Faderfox] Routing Maschine audio into Live then out to Traktor

Here is what I would like to:

-Control single sounds/samples volume outputs from Maschine via my Faderfox LV3
-Maschine audio would be eventually routed to Deck D in Traktor

Is this possible running Maschine as a stand alone or must I open it as a plugin within Live. Do I need to route the audio through something like JACK OSX?

Example:
-Deck A is playing
-Hi hat and clap from Group A in Maschine is syncd to traktor and is in step mode
-Volume levels are brought in individually from the Faderfox for both the hi hat and clap and can be heard on Deck D in Traktor
-Channel 4 on my DJ mixer is kept always at full volume.

Setup:
-Maschine (custom DJ midi map)
shift+control brings me into native mode to control Maschine software
-Faderfox LV3
-A&H mixer
-NI Audio 8

Let me know if anyone can help. Thanks!

 

https://traktorbible.com/en/t2_maschine_ta10.aspx
Is this of any help for you?

 

Also, I posted this yesterday but for some reason the 'Moderation' glitch held it up.

You can run Maschine as a plug-in in Live, set-up internal routing of Maschine on tracks outputing to Live's master's output channel. Map the Faderfox to control track volumes and use one channel of the Audio 8DJ to output live's master to the mixer.

Review DJ Endo's blogspot on Dubspot about synching Traktor & Live on the same machine. and if you haven't done so, get his TSI to control the decks.

You can also read my posts in the Xone DB4 topic of this forum, I have explored this routing and similar.

 

Thanks for the help guys. I actually got a friend to help me route everything. It works well now! 8 channels out from maschine to live!