Multi-Output Routing Issues Since Update (Komplete Kontrol)

I'm using a single, multi-output instrument (percussion).

1. Only the 1st 2 stereo channels in the Komplete/Kontakt "console" seem to send audio to my DAW. 3 & 4 don't pass audio though their meters respond.
2. The surround channels send audio to the soundcard/host output, and sound distant. Surround?
3. Meters of channels passing audio to my DAW are brighter than channels not passing audio.
3a. If a surround channel is receiving audio, its meter is duller and the audio is sent to the soundcard/host output.
3b. If stereo channels 3 or 4 are receiving audio, their meters are duller but the audio isn't sent out at all.
4. I remember being able to set the soundcard/host output to an aux and they'd receive no audio, and the stereo channels created would follow. Now the aux channels start at 10 and are followeed by unassigned channels.
5. My Studio One presets, created prior to the update, work fine when initially loaded (old Komplete/Kontakt?). But once I change the preset, the routing is destroyed and I'm at step #1.

I've attached a screenshot of my output options in case they help.

How do I setup a multi-output instrument in Komplete Kontrol?
What channel should I set as the soundcard/host output if I don't want it to receive/send audio?
What has the surround-labeled outputs crossed, sending audio to the soundcard/host output channel?

Thanks