1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE

Multichannel MIDI Instrument

Discussion in 'KORE' started by sepp8, Jun 20, 2010.

Thread Status:
Not open for further replies.
  1. sepp8

    sepp8 New Member

    Messages:
    18
    Hi,
    I am struggling with this problem (on Kore 2.1.009 & OS X.5.8):

    I want to build a multichannel VST MIDI intsrument with 4 slots (MIDI ch 1,2 ,3 4 polyphony 4) with the same VST instrument plugged in (f.e. AAS Ultra Analog).
    How I have to adjust the settings, that I receive on the first source channel MIDI ch 1, on the second MIDI ch 2 etc. and control f.e the OutLvl on every slot differently ?

    I work with a Haken continuum controller, which sends MIDI infos on every touch on different MIDI - channels (ch1 Note on, Ctrl 7 and Ctr 74 and pitchbend, ch2 Note on, Ctrl 7 and Ctr 7 and pitchbend, etc ).

    Still now, I have no success...

    sepp8
     
  2. ew

    ew Moderator Moderator

    Messages:
    21,328
    Change your settings in each Kore channel to receive on only one channel, and not all. Or, use the MIDI filter in the first slot of each channel.

    ew
     
  3. sepp8

    sepp8 New Member

    Messages:
    18
    I already used these settings (only one channel on each Kore channel), but it behaves not like expected. I sent Ctl 7 on ch 1, it works only when the channel is selected (highlighted), and with Ctl 7 on ch2 the others are moving, strange.

    I will try the second suggestion.

    thanks
    sepp
     
Thread Status:
Not open for further replies.