1. Please do not install macOS 10.15 Catalina yet, as Native Instruments software and hardware products are not supported under macOS 10.15 yet. For more info, please go HERE!
    Dismiss Notice

My THRILL Layouts for TouchOSC

Discussion in 'KONTAKT' started by joeyluck, Dec 10, 2018.

  1. joeyluck

    joeyluck New Member

    Messages:
    3
    Hey everybody! This is my first post here :) Hopefully I'm posting in the correct area.
    I just recently bought THRILL. I had seen a mobile app being used in the THRILL Walkthrough video, and support informed me that it was TouchOSC. I liked the simplicity of having one large XY pad. I got Touch OSC and I then made a few layout pages with different features that I find handy when performing with THRILL.

    You can download it here, attached to the bottom of this post.


    Installation
    To install these, you will need the TouchOSC Editor application for desktop. Simply connect your iPad or other device to the same WiFi network as your computer running the TouchOSC Editor software. You will then Open one of the layouts in the TouchOSC Editor, then press the ‘Sync’ button. From TouchOSC on your iPad or other device, you will navigate to LAYOUT and then click “Add.” You will then choose the Host (your computer). You will then see the layout in the list.

    Links to the mobile app and desktop editors are available here: https://hexler.net/software/touchosc
    Documentation for TouchOSC is available here: https://hexler.net/docs/touchosc

    Layouts
    Included are both vertical and horizontal layouts for iPad. You can load both of these to use either/or at any time within the TouchOSC mobile app. These were written for and tested on an iPad Mini. They should resize for other devices, but if need be, you should be able to adjust the layout via the TouchOSC Editor application to better suit your device.

    Pages
    There are three pages: Simple XY, Multi-Touch XY, and Simple XY + Keys. The XY pads on all pages make use of THRILL’s default XY assignments, where X=CC2 and Y=CC3.
    • Simple XY
      This XY Pad simply controls the XY pad of THRILL. If you prefer to trigger notes via another MIDI controller, such as your MIDI keyboard, this is the XY pad for you.

    • Multi-Touch XY
      This XY Pad uses two touches.

      The first touch triggers and plays the note, C3, while also controlling the XY of THRILL. This makes performing with just an XY pad possible and handy for precision and timing (note on and off is in sync with your XY performance).

      The second touch (second finger) controls Pan/CC10 (X) and Volume/CC7 (Y). This is great for adding motion and another layer to your performance. There are reset buttons included for both Pan and Volume. The Volume resets to -6dB, while the Pan resets just right of center (inside Kontakt, value 63 = “1 L” and value 64 = “1 R”), this button resets the Pan to 64 or “1 R.” If you care to completely reset the Pan, you can do so inside Kontakt. But while performing, you’ll likely find this change to be indiscernible. If there is another trick to get Pan to = center, please let me know.

    • Simple XY + Keys
      This is the same XY pad found on the first page (while smaller on this page in the horizontal layout) with keys included at the bottom. There is a row of standard push buttons at the bottom as well as a row of toggle buttons just above those. The toggle buttons come in handy since they hold the note until you toggle them again. So you can choose a note or chord via the toggles and then play with the XY pad while the notes are held. The range is C2 - D#3 in the horizontal layout and C2 - C3 in the vertical layout.

    Hope some of you might find these layouts useful! [​IMG]

    Cheers,

    Joey

    Simple XY in horizontal layout
    [​IMG]

    Simple XY + Keys in horizontal layout
    [​IMG]

    Multi-Touch XY in vertical layout
    [​IMG]

    https://drive.google.com/open?id=1uBtQPY779ZicdWrRawM7ttKu9Q5lrDxp
     

    Attached Files:

    Last edited: Feb 19, 2019
  2. joeyluck

    joeyluck New Member

    Messages:
    3
    Hey I've seen a few people have downloaded it. Any feedback? :)
     
  3. vucicm

    vucicm New Member

    Messages:
    1
    Hi Joey - I was interested in downloading your layouts for this. Im trying to control Thrill with my ipad in logic pro x. I don't see any links to download. Would you be able to share? Thanks and I look forward to hearing from you.

    -Matt
     
  4. joeyluck

    joeyluck New Member

    Messages:
    3
    Hey Matt!

    Sorry for the delay. I added the file to the first post. Let me know if that works for you!
     
  5. Johnny Stitches

    Johnny Stitches New Member

    Messages:
    2
    Amazing work! I was going nuts on figuring out what they were using on that iPad. You save me from a ton of head aches. I'm on Logic Pro 10.4.6 works great!
     
  6. Johnny Stitches

    Johnny Stitches New Member

    Messages:
    2
    Spoke too soon I can’t get logic to detect the lay out