NanoKontrol2 Encoder problems

Hi everyone,

Im using my Korg Nano kontrol2 controller with traktor as its the only useful peice of equipment i have at the moment.

I'm trying to use one of my encoders to control the "key adjust' parameter, but when i set it up, the key adjuster onscreen will behave really erratically.

I've had this problem in Ableton Live 8 and I fixed it by selecting a different encoder mode. The problem I'm having in Traktor is that no combination of encoder modes will work. I fixed this problem in ABleton but I cant seen to fix it in Traktor and its really annoiyng because I cant use half of the controls properly.

Someone please enlighten me on how I can fix this

Tim

 

Check out Korgs Kontrol Editor.
You might be able to change the necessary encoder properties there.

 

Thanks for that, but I have the latest drivers and software and i've read those manuals and it doesnt help

Ive tried everything and even with other versions of traktor and it still wont work :\

 

So did you also try to set the controller type to Fader/Knob instead of 'Encoder'?
That's how I get the encoders working on the NanoKontrol 1.

Otherwise check out some mappings for the Nanokontrol 2. You might find some hints there.

 

Hey there!
Old topic but i have almost the same problem…
I've mapped the Nanokontrol 2 with Traktor 2, all work fine except my knobs on the Korg.
I would like to use them to control Fx's on traktor. I've mapped all functions on the knobs, Encoder mode/Relative. When values goes up it's ok, but when values goes down, they goes down directly to 0… :/
Is someone have an idea?

Cheers,
Julien

 

Have you already tried using [Fader/Knob] instead of [Encoder]?: https://www.native-instruments.com/...how-to-use-the-controller-manager-in-traktor/

Otherwise can you post more info (or maybe a screenshot) of how your settings of the mapping for one knob looks like?

 

^^This. They're knobs, not encoders.

 

Thanks for your reply guys!
When i'm using Knob/Fader, values goes from 0 to max when i turn my Knobs.
As they said on the manual: Encoder function is for digital value with a minimum and a maximum..

Here is my settings on traktor

 

I had the same problem but found the following fix in the instructions accompanying the Traktor setup file available on Korg's website:
https://www.korg.com/us/products/computergear/nanokontrol_studio/.

The solution is to put the Korg nanoKONTROL Studio into "Assignable" mode via one of these two methods:

1. hold down "Scene" + "Cycle", then turn the unit on - the button lights will blink several times
2. open KORG KONTROL Editor, then choose: Global > Controller Mode > Assignable > Write

This fixes the encoder behaviour. With the following settings, they don't snap back to zero anymore:

• Device Mapping: Ch01.CC.013 (leftmost encoder)
• Control: High Adjust
• Type of Controller: Fader / Knob
• Interaction Mode: Direct