Need help with Traktor Pro+FIREFACE400

Hi guys,
I do need some help with setting up Traktor with my Xone92 and the FF400. Anyone using this setup?
I did connect the FF with the Xone with 4 cables >>Stereo-Jack -> 2xRCA<< since I want to use all 4 decks of Traktor.
Looking at the Audio-Settings in Traktor, I just seem to be able to assign the L/R-channels to OUT 1 AND 2. In Order to use all 4 decks, L/R-channels (of deck A) should be assigned to OUT 1 ONLY...
Any suggestions? I did post this in the german forum too...
Thanx in advance for your help - I appreciate it!

Greetz,

bodm

 

Noone using this setup?
I am happy for ANY hint /reply... PLEASE HELP! TY!

 

Deck A should be connected to Out 0 and 1 (as they count as mono out); Deck B to Out 2 and 3, Deck C to out 4 and 5 and finally Deck D to Out 6 and 7.

Bear in mind that Traktor's Out 0 will be Physical Out 1 on the Fireface

 

Looks the FF400 has only 6 analogue outs, so at best you can mix 3 decks externally (assuming that's what you want to do). From what you are describing you have traktor setup for internal mixing. You need to change to external mixing and assign each deck to the output pair you want to use, don't know if your mixxer handles digital audio, but maybe if it does you can connect the output of one deck to that.

 

Hey guys, thanx for your replies!
YEs, I do want to mix externally - I am using an A&H Xone92. SOme ppl in the german sction told me ho to do it. Connecting 3 outta the 4 decks through the outputs 1-6 (I was confused since I thought the Stereo-Outs would deliver a L/R-Signal - I know I was wrong...*blush*).
Looks like I can connect the 4th deck via the headphone-slot at the front - I'll try to do that and will tell you whether it worked out or not.
Thanks again for your help guys - I appreciate it!

Greetz,

bodm