No Headphone Audio from Mixtrack Pro

I'm running Traktor Scratch Pro with a Numark Mixtrack Pro. Everything is working perfectly except for my headphone cue. I have no audio coming out of my headphone jack when pressing the cue button. However, the audio does come out of my main speakers when I press cue. Here is my setup:

Mixtrack Pro: RCA cable from channel 1, 2 to female aux, aux to my speakers.

Traktor Settings: Mixing Mode: Internal
Output Monitor: L: 3: Speakers (2- MixTrack Pro) Out 2
R: 4: Speakers (2- MixTrack Pro) Out 3
Output Master: L: 1: Speakers (2- MixTrack Pro) Out 0
R: 2: Speakers (2- MixTrack Pro) Out 1

Computer: Windows 7 64-bit

Thanks for any help!

 

Looking at the back of the Mixtrack Pro there seem to be two sets of RCA outputs there, you might be sending your monitor signal to one of those.

Do you have any other output channels available for your Mixtrack in Traktor settings?

 

My Setup

I've tried a number of things:

1) I set the output monitor to 2 and 3 for L and R respectfully, and connected my headphones to the 2,3 rca output in the back and tried the cue but had no luck. This is shown in the first picture of the album above.

2) Set the output monitor to "not connected" and plugged my headphones into the headphone jack on the mixtrack, also with no luck.

The second screenshot in the album shows my output monitor options. Should there be more output channels available?

Thanks for your help.

 

Reply

I'm not exactly sure how this forum works but I submitted a reply pending the moderator's approval. I will repost if it doesn't show up.

 

Mixtrack Pro no audio in headphones.

I have a Numark mixtrack pro and I have set up all the mappings neccesary to use it with traktor because mine came with virtual dj, But there is no audio coming out of the headphone jack. I currently do not own a sound card of any kind. I have Traktor Scratch Pro 2.0.3

Is there any way I can make it work. Or is the sound card essential in this situation?
Please Help.

 

I've tried 3 submissions but they're all still waiting the admin's approval...trying again now...

This is a link to pics of my setup: http://imgur.com/a/mTGdB

I've tried sending the output monitor to channels 2 and 3, and plugging my headphones into the back channel 2 and 3 outputs, but no luck. I've also tried setting the output monitor to "not connected" and connecting the headphones to the normal headphone jack, but still nothing.

Thanks for your help.

 

did you get an answer for this... i have exactly the same problem. seems the headphone jack only works with traktor software and not any other computer music outwith traktor