Numark Stealth Control won't work!

I just purchased a Numark Stealth Control, but cannot get it to work. Please help!
When i plug in the usb to the Numark, it come up as hardware found, identifies it as the stealth control, and says that the hardware is ready to use.

However when I go to install the driver on the Traktor LE disc, when it asks you to plug in the usb device, it does not recognize it at all and eventually times out.

That's as far as I've got with this thing, I haven't even seen the numark even light up yet! Please help!

 

Best not to plug in a USB device before the driver has been installed. Find the Stealth Control in device manager and delete that driver. Remove the Stealth from the computer, install the driver, THEN plug it in.
That should do the trick

 

I have the same problem

Same problem as OP, but I cannot find the name of the device in Device manager. Where would this be/ what would the name of the device be?

 

same problem, I cannot install numark drivers (timeout 0x0005).
Im using win7 ultimate 32bit.
---
"Best not to plug in a USB device before the driver has been installed. Find the Stealth Control in device manager and delete that driver. Remove the Stealth from the computer, install the driver, THEN plug it in.
That should do the trick"

thats not helping

ok, Ive tried on vista 32b, - nothing
tried download drivers from numark site (ver 2.8.17 - like on cd) - nothing

Please help!

 

ok, I've got it!

Problem with instal drivers.

1.open contrl panel - device manager and then connect numark s.c.
2. focus on two sections: sound controler (your sound drivers, usually relatek) and usb drives. after you connect s.c. (stealth control) new driver should be active in sound controller drivers (you should have numark s.c. and relatek). usb drivers - without change. that means your drivers are ok.
3. if after connecting s.c. to your laptop, you will not see numark drivers in sound control area, and you get message that "windows cant recognize usb device - code 43(?)" (check usb driver - usb device unknown - ! or ? mark) then you have got problem with drivers.
a) turn off antivirus
b) turn off any audio drivers (relatek or any in sound control - control panel)
c) try instal drivers again. dont bother if you see any massage abut timeout. try instal drivers until you will see numark drivers in sound drivers on your laptop (remember that you can see them only when device is connected!)

problem with numark stealth control

If after connecting numark s.c. you will not see any error massage and you drivers are ok (visible in soud control drivers) but you cant see any reaction from device you just have to:
1. turn on traktor
2. "help" -> wizard
3. then you choose numark and stealth control

thats it, enjoy

 

I use a Mac and already have Traktor Pro and just bought a Numark Stealth Control...
I cannot seem to get any action from it.. probobly silly questions but...

Do you need to install the Traktor LE? No right?
In my Traktor preferences,if the control is plugged into the USB,in the Midi Setup menu i see Traktor Virtual output and also the Numark Stealth.(in both the input and output boxes)it says its(both) active but the control has no action,no lights.... no life!
Is it a power issue to do with my laptop?
Im going mad with this...... i thought it was just a simple plug in? i must be doing something wrong or have the preferance settings wrong?

Pleeease help! in the easiest way of explaining!
Thanx

 

I dont know how it works on mac but maybe I can help

Everything seems to be allright. Im sure that is not a power issue and you dont have to install traktor le.

After you open traktor in help menu (top left corner) choose "start setup wizard", then in window select numark and then stealth control.

you traing to run controller with traktor pro so there is one important thing. it is possible that after you choose manufacture you will find only total and omni control (I had this issue). what you have to do is:

1. www.numark.com --> products --> stealth control --> documents & downloads
2. find a file "STEALTH CONTROL - Trakor PRO MIDI Map TSI File"
"This MIDI Map file adds STEALTH CONTROL control-surface support to Native Instruments' Traktor PRO (full version). This file is not needed or compatible with the Traktor LE software which is included with the STEALTH CONTROL."
3. There is a manual in pdf how to run it. if you have a problem just copy map file to your maps folder (where total and omni maps are) and choose load from preferences menu.

if any problem, whrite here or xbox live, but that should help anyway. if not you can call numark servis, they known everything.

enjoy

ps. stealth control works fantastic with traktor pro

 

any joy?

Dear Cruisin DJ, or others with the same problem, have you mangaed to get anywhere with this? I still have no lights, no action, time oue 0x0005 when installing drivers off the disk, and generally nothing but hair pulling out frustration.
Do i have to send this back? A lot of people have registered the same problem around the internet but theres seems to be few concrete solutions. Please someone tell me what I can do to get this thing working!

I'm on Win 7 32 bit, and would or will be using Traktor 3, but until the ligths go on and something starts happening, i ain't using any bloody software.

Many thanks guys,

j

---
Cracked it at last!

stupid thing doesnt light up unless you have an audio device selected in th output routing, which i didnt have because i'd taken my ext. soundcard out for the meantime. lights up and seems active straight away, even without the cd installation actually working. (timeou error)

lets hope everything goes smoothly from here

 

So i have tried everything, i have a mac and i can't get my numark stealth to light-up/turn-on/work at all...it is really aggravating, could someone please tell me what to do

 

get traktor pro, instead of traktor 3, it has a wizard and makes it work first time. did you try turnignt he output routing on? i was pulling my hair out in rage for a while, until i got traktor pro's wizard and its been smooth ever since.