Poping and skipping

Well i have a problem, my sound is poping, i have increase latency and same problem again, that problem happening and on vista and on XPsp3, what is the problem?
And on xp my audio wave are skipping too, i do not understand what is the problem, because TS pro is brand new...

 

Are you using the update version 1.0.2?

 

Yes iit is 1.02 version

 

make sure you wi fi and bluetooth is switched off, I had the same problem myslef.

I also changed the latencey myself (settings) I changed the settings in here, think its called USB or something, its alot better but still not 100% happy. (still getting popping noise)

Anyone any suggestions to get that crisp (non popping sound)

 

I ahve turned off wifi and still the same s...

 

Hi fellas,

Ok....so I have had this nightmare as well. Tried everything and although i had improvments, still didn't fix the issue properly until last night...(2 weeks in)
You may be having an issue with the ACPI on the system which controls the power managment side of things. Here are some thing you can try to get rid of the pops n cracks over the USB interface.......

Make sure ALL devices in Device Manager that have a "Power Managment" tab have the box "UNCHECKED" for 'Allow this computer to turn off this device to save power'. This includes...

* Bluetooth
* Wireless
* LAN
* ALL USB Root hubs

Disable any Anti-Virus software that is running on the system. This software may be trying to scan the drive at the time of playing and may cause excessive bus load.

I am running an HP laptop with an AMD x2 core CPU and found the very thing that sorted my issues out. It is called an "AMD USB Filter Driver".
I understand that most will have an Intel core 2, but maybe worth looking on the net for a driver that does a similar thing. This is what actually solved it for me.

I can now run Traktor 1.0.2 with both decks playing.......LAN on......Wireless on.......Streaming video from You Tube/BBC etc.....all at the same time....NO drop-outs, pops or crackling..........All this and with a latency of 6ms.......

For a more indepth explanation to all of this, please see my thread......

http://www.native-instruments.com/forum/showthread.php?t=77821&highlight=pops

Hope this helps....

Cheers

Mark

 

Thanx mate i will try it all

 

I ahvo done all of that but problem is here, but i have noticed that popping sound comming only when i play with timecoded vinyl, without that there is no popping...
---
I have resolve the problem
After a trying of anithing taht people have said to me i try something that noone have mentioned.

I was reinstall aplication and install tracktor pto no traktor scratch pro and now i do not have problem.

Thanx good that now you can choose what you want to use TP or TSP. No popping and skipping now, on 5.5 ms latency.



Edit:

And only if the keylock is off, when is on there are still little poping and when is off works great!

 

I had popping occur just once but I did a little research and solved my issue. I use the BCD-3000 controller. The problem was that my track cache was set too low. Make sure your track cache for each deck is at least 32MB. Once I changed my track cache to 32MB for each deck I never had the popping problem again I've never touched the latency settings, wether with Traktor 3 LE, Traktor 3, or Traktor Pro. I've used the BCD 3000 and Traktor for major professional gigs sometimes 6 hour sets and since I made the adjustment to track cache I've never had the popping problem.