Problem recording on Traktor Scratch Pro (see pics)

Want to record a mix but the leds on the Audio 8 channel D 7/8 are NOT flashing on the incoming music.
One end of the RCA cable is connected in to the Master Out 2 at the back of the DJM400 and another end to IN 7/8 of the Channel D on the Audio 8 DJ.
Because i`m new to Traktor i suppose that the problem might be with my settings,i have uploaded a few pics just to make it easier :

1 Audio Setup

2 Output Routing

3 Input Routing

4 Recording

Need your help please.

All the best

 

What happens if you go from Master out 1 to the Audio 8 and from the second out to the PA?

Did you try Input 5/6?

 

Sorted! I have changed the master outputs and the input to 5/6.

Thanks Frace, you`ve made my day !

 

I only get two options for inputing and outputs, Idk how to route it and absolutely no one will help. You know why?

 

Please post more info like op did.

 

Disregard my last question, I've gotten a little farther.. Now I've got TSP recognizing my 2 cdj350s + djm400, but when I record it's just white noise. I've got no RCA coming out of 5/6 or 7/8 on the soundcard. Not sure what to do. Do I need another RCA or do I move an RCA already in use?

 

Where does your record out of the DJM go to and what are your recording preferences?

 

I'm guessing that is my problem. I have nothing connecting to the record out. Do I need more RCA cables?

 

Yes, you need to go from the record out of the DJM to in 5/6/7/8 of your interface, assign these inputs to a channel and assign that channel as the external recording source.

 

I thought I saw a record out on my mixer before.. but I guess I don't.. lol. Do I go from master out to 5/6 or 7/8?

 

It seems like the DJM 400 has a second Master Our, use that.

It doesn't matter where you go in, you could even go in 5/7.

I prefer 5/6 because you can see the volume of the incoming signal on the little LED bar and see if it clips.

 

Thanks so much, good look man.

 

I keep buying the wrong cables man, I know I'm dumb as hell but on the master output it has a red and white, and the soundcard has red and black. The RCAs I have are just red and white. Are there RCA cables with red/white then red/black?

 

The ones you got are fine mate

 

I just found that out. haha. Thanks everyone for the help!
---
Still no recording! I don't know.. I'm uploading pictures like he did.

 

Picutres are probably the fatstest way to solve this.

Please post Screens of your Input routing and Recording Options.

Oh yeah, and check if In 5/6 on your Audio 8 are set to Line and not MIC (There's a button for that and an LED indicator)