[RELEASE] 3rd Party VST NKS Preset Libraries for Komplete \ Maschine

Vintage Vault UltraMini Library Fix

There is a fix available for UltraMini library in Vintage Vault. A few of the library banks did not work with the mapped parameters, a lovely quirk of the UVI eco system when switching between some instruments in workstation/falcon you loose all mappings and I never noticed this one when I created it and am not a user of UltraMini (nor are many based on the fact I only had this reported today).

Anyway, this library had to be redone from scratch because host automation first needed to be mapped so it was a bit of a pain but if you have been affected by this you can update download the latest version here:

https://freelancesoundlabs.com/index.php/component/k2/item/348

You only have to replace the UltraMini library in the collection but can choose to delete the whole library and reinstall it if you wish.

 

Hello again!
This is probably just a lacking knowledge question, but in the addictive Drums 2 pack, are there unprocessed presets for each kit? I assume they're just the presets labeled "clean pearl and tama", but I'm not sure if all of those presets exists on all of the kits or not.

 

Not quite understanding what you are asking. It contains all presets for each kit. I would need an example/screenshot of what you are refering to as I don't really use AD much myself.

 

When I use the link above, I see all available downloads for the NKS UVI files.
I purchased Vault 2, which includes UltraMini, but I cannot download the updated version separately. I can download the complete library of the Vault 2, but that download seem not to contain the updated UltraMini.

And: any news on the Synthmaster Everything Bundle-Update?
Thank you!
Thomas

 

The vintage vault bundle should have it updated. If controls don’t work please send me a NKS file via pm so I can check it.

No eta on updating synthmaster.... it’s a real pain to process, time consuming and there are already so many presets for it, I keep putting it off, one day hopefully.

 

Now Available...

Omnisphere Bob Moog Tribute V2 Update

I figured I would get this done ASAP as I get asked several times a day if/when will update? Answer is it is now available.

This is the updated version which includes the new presets and offers a convenient bank in the NKS browser to select to browse the original V1 presets or the newer V2 presets making it handy to see what is new. All files are tagged with the tagging from Omnisphere and of course previews etc are included.

UVI Drum Designer

UVI Drum Designer for both Falcon/Workstation. This includes all the kits as well as each individual kit elements as presets. Also includes a library for single track use and multi-track use in a DAW selectable using the Bank feature. If you really never need one or the other, just delete the appropriate NKS folder from your library to remove from the browser


Falcon Expansions: LoFi Dreams, Savage


2 new expansions for Falcon now available: "LoFi Dreams" and "Savage"


https://freelancesoundlabs.com/nks

 

I've discovered a problem with Cherry Audio Eight Voice. The parameters are not correctly listed and half cannot be accessed, By the time you get to voice 8, only 4 of the parameters are available due to some issue they seem to have with the way they designed it:


Those blank spaces should all be parameters but they are missing.

I have contacted Cherry Audio but if they cannot confirm/fix I will be asking for a refund and will be unable to process this one so hopefully they can fix this because no issues with their other plugins.

 

Looks like the previous issue was some kind of "first run" problem because after unloading and then reloading again the parameter list is now fine and all controls seem to map so should be able to now get stuck into this one.

 

Good news !

 

Now Available

Cherry Audio Eight Voice NKS Library

Processed and tagged all factory presets. This one has a LOT of parameters available and it took some time to decide how to best try and lay these out so that most of the functional control was on the first pages, but additional tweaks were available on later pages. I think the page count is about 30 which is pretty extreme but I know there are a lot of users out there that really need access to the controls from the hardware so have done my best to cover as much as practical.

There are a few parameters not mapped, mainly mode switches but if you feel something is really needed let me know and I can look at updating the template if it is worth it.

https://freelancesoundlabs.com/nks/eightvoice


MusicLab Real Guitar Collection

I have had RealGuitar for years but always struggled to figure out how to best map the controls and also, how to best create templates for the different modes. Also didn't help that as I started making a template, newer versions of RealGuitar were adding and changing things quite a bit so now that all models are finally at the same V5 level I have managed to painfully finish all of these.

Each of the 5 different VST versions is available with all the single/multi-track versions of the plugins bundled into a single NKS library with banks to select if you need to use a single, layered or multi-track preset in your project. Each of the different modes and model presets have also been saved out so you can instantly load up the way you want to work. Just delete the presets for a specific mode (such as joystick if you do not use a virtual guitar device) to remove them from the browser. Can do this with a right-click within the NKS browser.

Most of the available parameters have been mapped but it should be noted that not all parameters have host automation available so cannot be mapped.

https://freelancesoundlabs.com/nks/realguitar




https://freelancesoundlabs.com/nks/realguitar

 

Hello,
Appologies for not answering this question. I was more wondering which presets had no effects that were used on them, as I know certain ones (like Studio Rock) use the Clean term for the completely unprocessed kits, but others don't seem to have that. I assume they exist, but I'm not sure which ones they are.

 

This is a separate post, as this is a more general question regarding how NKS files are created. To have access to the parameters in the NKS file, is it necessary to be able to automate them, or allow them to be automated? I've checked out EZDRUMMER 2 recently, and from what I couldI'd love to be able to make these files as well, but I'm not sure if there's an accessible way to do so, or if the process is just writing a program script that assigns a parameter to specific page. a

 

Presets are derived from the preset kits within AD2. I cant be sure what do and do not have effects added only the preset kits in AD are all 1saved out and of course you can change a preset and save it yourself too.

I'd say as first step you look into the basics of how to save a preset and how to map parameters. You do not need to make scripts or anything complicated, info exists around the place, but it is as simple as file > save as to make a preset and the control pages are all point and click to add parameters but be aware that not all parameters within a plugin are open to host automation so if it does not learn, it cannot be mapped.

 

FYI: right now G-Force is having a sale - the complete bundle is half price. I know it's still not really a no-brainer but wanted to let you know since I'd love to have M-Tron inside NKS.

Edit: the link: https://www.gforcesoftware.com/products/m-tron-pro-complete/

 

yeah I snapped it up a month ago and have the factory library and the free expansions all done. The extra tapes will also be done but it’s a long process to tag them so will be in the future a little. Should have factory available next month.

 

Wonderful news, really looking forward to this. Thanks for your work!

 

Yesssssss

 

Now Available: Gforce M-Tron Pro (factory + free libraries)

https://freelancesoundlabs.com/nks/mtronpro

Finally available is Gforce M-Tron Pro NKS library. This contains the main factory library plus the freely available expansion "tapes" from Gforce all made up into convenient banks with full detailed sound tagging, controller map etc...

This took a while to tag as there is limited info to pull so much had to be done by hand and the reason only the factory library is available at the moment but all expansion tapes (including the newly released Streetly 6) will be available maybe by the end of the month, depends how insane I go from tagging sounds for hours on end.

Have tested this on PC and works perfectly but if you are a Mac user, please grab and test the demo first to be sure because I was too lazy to want to test on mac, just assume it will work.

 

Thank you

 

Finally! Thanks a lot for your hard work.