Reset if KILL ?

Hi, I'm Using one MIDI controler, and when i map reset all EQs,Filter and Key... but... if they are killed, this reset doesn't work..

My question is how to set reseting kill if its killed?
Thanks

 

can you write the exact ''map phrase'' that you have added ?

 

Here is picture: http://nicox.club-bg.org/mapping.PNG

 

so if for example you have killed the low eq.. it won't reset?

 

Yup, If Low EQ Knob is down and Low EQ is KILL, when you press the button, only the knob is reset, the KILL is still ON :/

 

ok. if you are ''killing'' all the time the eq's and then you reseting
try to assign in the button that you are using to reset
to kill too...this is what i am thinking about
1) you press the ''A'' button to kill the low the "B" to kill med and "C'' to kill hi
2) you press the ''D'' button (Note.G-1 as shown in the picture) to reset them but kill remains
3) assign the ''D'' button to kill low med and hi too so they will return to off and they will reset

the only problem with that is that you have to kill and the 3 eq's but maybe you will find a parameter so that ''D'' button togles kill ONLY off

i hope that i helped you and sorry for my english

 

Can't this be done easily with a modifier? basically a kill toggles a modifier value that holds until the reset button is hit. so if modifier is 0 nothing happens if it is "x" kill is set to off

 

Thats what i mean... but i dont know how to do it :/

 

Think I got it working like this (I was using my keyboard but the same principles should apply)
Two buttons:
"=" as an EQ Low kill and modifier
"Insert" as an EQ Low Reset, EQ Low Kill* and Modifier

-----------------------------------------------
Modifier/Kill
-----------------------------------------------
Modifier 1 on "="
Button|Direct Global
Set to value: 6

In > Mixer > EQ > EQ Low Kill on "="
Assignment "Deck x"
Button|Toggle

-----------------------------------------------
Reset for Modifier and Kill/EQ level
-----------------------------------------------
Modifier 1 on "Insert"
Type: Button|Direct Global
Set to Value: 0

EQ Low on "Insert"
Type of Controller: Button|Reset
Assignment: Deck "x"

EQ Low Kill on "Insert"
Modifier Conditions: M1=6
Type of Controller: Button|Hold
Assignment: Deck "x"
Button Options: Invert Checked <<<Important!

 

I try it... that is invert of that i want. If the kill button Isnt killed when reset the button kill it, when is kill, the button do not make anything. I remove inveret value, but its same.

 

Hmmm, worked for me but perhaps because i was using a keyboard? Are you sure you checked the modifier conditions?

 

Yup.. I'll try with keyboard righ tnow
---
Hm.. With Keyboard is ok, but with MIDI its working invert...

 

Hmm... I try it with Audio Kontrol 1 MIDI - Its work... but... with Xponent no :/