routing to external audio what am i missing?

Hello,

why doesn't Ableton see any of the internal audio routed from Reaktor apart from output 1 and 2?

What am I missing?

 

Are you sure the 3 last gates deliver? did you try the gate 1 going to out 3 and the others also... i mean from the clock...that way you can check the place about the matter before the outs...

 

Yes I’m sure they deliver.
Except from the first 2 inputs, none of the inputs in Ableton receive anything. No matter how I connect it to the output modules in Reaktor.

 

On Reaktor vst are two outputs only!
On Reaktor fx are some more.

 

Paule, apcut approach is correct because the midi channel only delivers 2 audio outputs or one, but then he reaches all other channels creating audio channels that have their inputs not from external, instead from the midi -audio output. Once you set that, there´s the little triangle allowing to select which output from the midi audio, and also as you point from fx on audio.

apcut
so, gate 1 on the util connected to output 3 doesn´t do a thing? and you see the sound indicator going up and down on reaktor? it is quite good to detect whether it is a reaktor or a live problem... do you have correctly enabled (not gray) the outputs on the Live config... off course a big interface you are working with...but they seem on black words...

I recently had some problem alike and the solution was starting from scratch... something in the intermediacy didn´t fit...

 

I remember I had this problem in older versions of Reaktor and/or Ableton. The workaround was indeed using the Reaktor FX VST in place of regular one. After some recent updates, it just works fine for me with regular VST as well, Reaktor = 6.2.0, Ableton = 9.7.5.

 

Thanks guys, i got it to work by first setting up stand-alone mode. Excuse my noob questions, but there will probably be more in the future.