1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE

Scrambled MKII LCD

Discussion in 'MASCHINE Area' started by Circuitt, Jul 19, 2014.

  1. Circuitt

    Circuitt Forum Member

    Messages:
    32
    When playing the pads and (applying pressure) the LCD screen get's scrambled.
    Is this working as intended ? :eek:
     

    Attached Files:

    Circuitt, Jul 19, 2014
    #1
  2. Spazoo

    Spazoo NI Product Owner

    Messages:
    1,733
    if you're trying to produce glitch then yes
     
    Last edited: Jul 20, 2014
    Spazoo, Jul 19, 2014
    #2
  3. taoyoyo

    taoyoyo NI Product Owner

    Messages:
    1,603
    Not sure if this is the case here but the only time I've had this issue is when I've had too many USB devices connected to my computer.
     
    taoyoyo, Jul 19, 2014
    #3
  4. b-righteous

    b-righteous Moderator Moderator

    Messages:
    9,673
    Looks like either short in hardware to the screens or USB connection issue. Plug USB cable directly into computer with no hub. Try a different cable no more than 6 ft and also a different USB port.
     
    b-righteous, Jul 19, 2014
    #4
  5. Circuitt

    Circuitt Forum Member

    Messages:
    32
    I am thinking it's hardware, if I tap the unit again after the LCD get's scrambled, it goes away. Not using a hub, plugged in directly to my desktop, only USB units I have plugged in is a RME Babyface an a USB wireless keyboard/mouse. I guess I can see if I can duplicate the error on my laptop.
     
    Circuitt, Jul 19, 2014
    #5
  6. Circuitt

    Circuitt Forum Member

    Messages:
    32
    Oh got a Novation Remote plugged in as well.
     
    Circuitt, Jul 19, 2014
    #6
  7. BIF

    BIF NI Product Owner

    Messages:
    1,109
    Yeah, check your cables and hubs and make sure that the MK II is getting a good connection. That display sure does look as though it might be a power issue, and the MK II gets all its power through the USB port. One loose cable or overloaded hub, and this could happen.
     
    BIF, Jul 20, 2014
    #7