1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE
NOTICE:

Our Traktor Pro Public Beta is available again in our new online community. Join us if you want to try new features.

MORE INFO

Some important suggestions for the TKS4 MK3

Dieses Thema im Forum "Feature Suggestions" wurde erstellt von creal, 18. November 2019.

  1. creal

    creal New Member

    Beiträge:
    18
    Hello,

    As a former user of an S8, I decided to switch to the more recent S4 MK3. I just bought it this afternoon and I found some important things that are not possible yet, which is not so nice (even if I'm very satisfied with the controller):

    - the external playing source cuts when shutting down Traktor or when plugging the USB cable into the computer (do I have to warn NI about it?)
    - we cannot loop-record a deck or main audio to a remix deck slot from KS4 MK3 (I know you want to be able to do that!)
    - we cannot assign different Mixer FX per deck (maybe it is a hardware limitation, but it's a shame)
    - we cannot browse tracks from Kontrol screens, which is painful
    - we cannot send MIDI clock over USB hub, so I can't sync my MPC

    Voilà, these are the most important features I would like to enjoy from the S4 MK3.

    Thanks for reading :)

    Cyril.

    EDIT : we can assign a specific mixer FX per channel (pp. 65-66 of the manual)
     
    Zuletzt bearbeitet: 22. November 2019
  2. dahJah

    dahJah NI Product Owner

    Beiträge:
    316
    Some good suggestions there creal. Let me add the two EXT channels are still too low even after the firmware update.
    Using a mic the trim and the channel are maxed out, same with an external source that doesn't have it's own volume control.
     
  3. Sûlherokhh

    Sûlherokhh NI Product Owner

    Beiträge:
    214
    If you hold FX Select and then press the channel button the chosen Filter FX will only be assigned to that channel.
     
  4. creal

    creal New Member

    Beiträge:
    18
    Thanks for the tip! :)
     
  5. creal

    creal New Member

    Beiträge:
    18
    You're right. I just tested the D mic channel and my gain has to be at 3PM (with volume channel at the maximum) to reach the orange LEDs. With an external source like a smartphone it is sufficient though (because we can max the volume from the source, as you suggest). I didn't aware that a firmware had to do with Mic input levels. I did know for the headphone output (which is great now) but not for the Mic. If the devs could do something for us, it will be helpful.
     
    • Like Like x 1
  6. dahJah

    dahJah NI Product Owner

    Beiträge:
    316
    Another one....Stand alone mixer is not so stand alone while playing and traktor goes off by accident or by malfunction. The mixer doesn't keep working if you shut off traktor. If you start without traktor the mixer is stand alone but once started (traktor) stand alone stops there.