1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE

Sounds wont play during live recording or when step seequinsing please help.

Discussion in 'MASCHINE Area' started by sound warrior, Dec 14, 2018.

  1. sound warrior

    sound warrior New Member

    Messages:
    4
    hi everyone I'm quite new to maschine I'm totally blind and I have the mk3 I was practising loading effects on to plug in slots using the hardware, and now when I live record or step seequenc a sound I don't hear anything when I press play restarting maschine has not fixed the problem. I still hear sounds when I press the pads in pad mode and keyboard view. please can someone help me solve this problem thanks.
     
  2. starjak

    starjak NI Product Owner

    Messages:
    31
    hi trey i am steve, sorry for contacting you here but i have a visualy impaired friend that wants to start using maschine mk3 this is my email address dstarjac@gmail.com . if you can help we will appreciate it a lot

    regards
    steve
     
  3. René must be Unique

    René must be Unique NI Product Owner

    Messages:
    2,128
    If you start recording with the Maschine hardware, the software uses the sampler engine as standard.
    That means that if you want to play the recording it must be triggered with a C3 note.
    That is now done by pressing the first pad.
    As you indicate.
    If you want to play these recordings as a loop, you must switch to the audio engine.
    On the hardware you do this as follows.

    1 press the PLUG-IN button
    2 press the 4-way encoder button once
    3 turn the encoder knob 1 step to the left
    4 press the encoder button once to confirm

    From now on the recordings will be played in a loop as soon as you press play

    René