Suggestions for Mixer (fx, eq, filter, etc.)

1. Delete effects above decks
I've noticed a silly tendency for all hardware manufacturers to place two effector panels above each deck, which is an engineering mistake. The effects / samples / loops section should be located in a separate block, as it is implemented in the classic pioneer mixer.
There is no point in effects on each deck, the DJ can only physically turn two knobs at a time. It also just looks wrong.
It might look like this


3. Hot effects on the pads
4. Sends, Returns (update group effects)
Make it possible for DJs to customize effects with their own settings. It’s very interesting for me to see the use of the dub fx mixing method, when 8 knobs have different effects,
The bottom line is that we prepare presets in advance and have 8 separate knobs for each effect
for example:
- on the first send we can be set delay 2/3
- on the second ping pong delay 3/4
- on the third send a small echo room
- on the fourth large room
and so on and every DJ will be able to prepare presets for themselves
5. Add support NKS effects or VST Effects
Based on the mixer effect that I suggested in this post.
https://www.native-instruments.com/forum/threads/controller-of-my-dreams.411677/
Add support NKS effects to Traktor and the usual vst effects that we can map.
A big plus of Ableton is the section of effects and sends, it is a very powerful tool that is 3 heads taller than any effects in a traktor, rekordbox or serato
Look at the Shaded DJ, what he does with the help of Ableton, Sends and self-configured effects, I think we, as DJs, must have the same opportunities, this is directly related to DJing, why is Ableton stronger in this? Need to fix it.
Related threads:
https://www.native-instruments.com/forum/threads/support-for-vst-fx.128327/
https://www.native-instruments.com/forum/threads/traktor-pro-vst.117008/
https://www.native-instruments.com/forum/threads/traktor-as-a-vst-host.113028/
https://www.native-instruments.com/forum/threads/native-instruments-traktor-update.105808/
https://www.native-instruments.com/forum/threads/vst-audiounit-support.80561/
https://www.native-instruments.com/forum/threads/traktor-vst-plugin.82352/
https://www.native-instruments.com/forum/threads/native-instruments-traktor-update.105808/
6. Open API for third-party developers for vst effects
7. Advanced Filter on mixer with resonance and LFO
I like the filter in Ableton, it sounds quite creative, I also think that it would be nice to use resonance and lfo, why do the same 4 filter knobs for each channel? Let each Knob be responsible for its own parameter and the effect will become more interesting. And those buttons. which used to be a filter effect activation will simply be an assignment to which channels the extended filter effect should be sent

Related threads:
https://www.native-instruments.com/forum/threads/i-want-a-resonance-for-the-deck-filters.79624/
8. Add the ability to save the status of the effects.
For example, you have prepared some parameters of the effect and saved it under the name "My favorite FX for switching to a drop". After that, you can always call it quickly for use.
Related threads:
https://www.native-instruments.com/...with-2-or-more-of-same-type-of-effect.329945/
https://www.native-instruments.com/forum/threads/features-requests.317293/
https://www.native-instruments.com/forum/threads/the-perfect-software.262639/
https://www.native-instruments.com/forum/threads/fx-and-deck-mode-chanined-to-layoyts.147017/
https://www.native-instruments.com/forum/threads/fx-presets.137055/
https://www.native-instruments.com/forum/threads/suggestions-for-new-features.118591/
https://www.native-instruments.com/forum/threads/next-level-effects-record-your-own.116615/
https://www.native-instruments.com/forum/threads/fx-presets.86176/
https://www.native-instruments.com/forum/threads/fx-sets-storeable.80393/
https://www.native-instruments.com/forum/threads/make-chained-effects-customizable.108954/
https://www.native-instruments.com/forum/threads/new-features-for-traktor-3.338979/
https://www.native-instruments.com/forum/threads/traktor-pro-3-wishlist.197118/
https://www.native-instruments.com/...x-bank-state-as-an-option-for-mixerfx.338771/
Ability to do and save effects in a specific place(cues) on the track
https://www.native-instruments.com/forum/threads/store-fx-settings-in-cue-point.99921/
https://www.native-instruments.com/forum/threads/store-fx-settings-with-song.105440/
https://www.native-instruments.com/forum/threads/cue-mode-for-fx.77488/
9. Add the effects of the wizard to improve quality and for the more uniform sound of the entire mix.
This will give monolithic to the sound of mixes right at the time of the performance. For example, it do this as post-processing of a mix in DAW or such radio shows as ASOT Armin, where it is clearly heard that they pass all the tracks through a certain master channel with effects, which makes their sound slightly unique and more bold.
Related threads:
https://www.native-instruments.com/forum/threads/analog-emulation-plugins.92893/
10. New Effect Sidechain
Related threads:
https://www.native-instruments.com/forum/threads/effect-idea-psuedo-sidechain-compressor.94449/
https://www.native-instruments.com/forum/threads/sidechain-effect.110740/
https://www.native-instruments.com/forum/threads/sidechain-compressor-effect.215729/
https://www.native-instruments.com/forum/threads/sidechain-pump-effect.446167/
https://www.native-instruments.com/forum/threads/sidechain-compressor-effect.215729/
https://www.native-instruments.com/forum/threads/sidechain-compression.106206/
https://www.native-instruments.com/forum/threads/multiband-sidechain-compressors.81285/

Related topics:
Suggestions for Traktor https://www.native-instruments.com/forum/threads/suggestions-for-traktor.419459/#post-1969409
Suggestions for Hot Cues https://goo.su/1EKX
Suggestions for Browser https://goo.su/1eKy
Edit Mode (F1 mk2) https://goo.su/1eKX
Stems https://goo.su/1ELD
A music system for a DJ that will make him happy https://goo.su/1gxs

 

Now, if we select group effects, then all the parameters are already defined and the knob that is responsible for the main parameter is also defined.

I would like to suggest making presets for group effects. For example: We set up the reverb effect, set the value of each parameter, indicate which knob will be the main one and click “remember preset.” I often don't like the presets that are made in group effects and I would like to be able to adjust these parameters

 

https://support.native-instruments....Custom-Version-2-FX-Sektion-als-3-Fenster-de-



FX seems going the TDJ2 approach too...

 

8. Open API for third-party developers for vst effects

 

Almaz
I admire yor patience to write these incredibly detailed posts.
However new features in Traktor are so far behind that realistically this would take years.

---
My alternative is much more pragamatic: just give users MORE COPIES of the existing functionality instead of new features frmo scracth.

Regarding effects all I wanted was to use any TP2 macroFX in the TP3 mixerFX slots:
https://www.native-instruments.com/forum/threads/access-all-tp2-macrofx-as-tp3-mixerfx-as-is.433417/

Speaking of mixefrFX, I'm currently sending mouse clicks to move frmo 4x mixerFX to 9x:
https://www.native-instruments.com/...effects-via-midi-mapping.346795/#post-1883865

This would be much simpler to deliver, right?

 

Off-topic, but related, I would ask simply for
- mappings: more modifiers, more conditions, more modifier states, etc
https://www.native-instruments.com/...ore-bits-more-conditions.329045/#post-1850327

- FX: simply more FX units

 

+1 for adding section with favorite effects section, that can be assigned to the pads.

 

I've noticed a silly tendency for all hardware manufacturers to place two effector panels above each deck, which is an engineering mistake. The effects / samples / loops section should be located in a separate block, as it is implemented in the classic pioneer mixer. I would suggest removing functions such as slicer, sampler, pad fx from the pad area of the deck, and always do this in the center of the controller.
There is no point in effects on each deck, the DJ can only physically turn two knobs at a time. It also just looks wrong.
It might look like this

 

Capas que en el año 2034 lo agregue

 

I was sent by the people of the future to tell all the DJs about it

 

8. Add the ability to save the status of the effects.
For example, you have prepared some parameters of the effect and saved it under the name "My favorite dale for switching to a dropp". After that, you can always call it quickly for use.
Related threads:
https://www.native-instruments.com/...with-2-or-more-of-same-type-of-effect.329945/
https://www.native-instruments.com/forum/threads/features-requests.317293/
https://www.native-instruments.com/forum/threads/the-perfect-software.262639/
https://www.native-instruments.com/forum/threads/fx-and-deck-mode-chanined-to-layoyts.147017/
https://www.native-instruments.com/forum/threads/fx-presets.137055/
https://www.native-instruments.com/forum/threads/suggestions-for-new-features.118591/
https://www.native-instruments.com/forum/threads/next-level-effects-record-your-own.116615/
https://www.native-instruments.com/forum/threads/fx-presets.86176/
https://www.native-instruments.com/forum/threads/fx-sets-storeable.80393/
https://www.native-instruments.com/forum/threads/make-chained-effects-customizable.108954/

 

9. Add the effects of the wizard to improve quality and for the more uniform sound of the entire mix.
This will give monolithic to the sound of mixes right at the time of the performance. For example, it do this as post-processing of a mix in DAW or such radio shows as ASOT Armin, where it is clearly heard that they pass all the tracks through a certain master channel with effects, which makes their sound slightly unique and more bold.
https://www.native-instruments.com/forum/threads/analog-emulation-plugins.92893/