TD3 BEHRINGER

Good Evening everyone...

Does ANYONE here have a TD3 plugged into your NI Maschine and using it..?

I have an MK1 with an AUDIOBOXUSB...running on Windows 10......everything is up to date... How do I connect and use the TD3 with Native .....? I tried the instructions from Behringer but nothing.... and the "award winning customer service" from Native told to come here.... so here I am..... HELP!

Thank you all and stay safe.....
JESSE ONE

 

Hey!

I have 2 TD3's. 1 connected via USB and the other midi through my Novation Super Bass Station. I did use midi from my Maschine MK1.
Firstly, stop the TD3 playing so you can set the SYNC mode. To do this you have to press the Write/Next button and the Back button together. When you do this all the lights across the 8 buttons at the bottom of the TD3 will light up. Press button 2 to turn it onto midi mode. My TD3's were both set to MIDI channel 1by default. You can change the MIDI channel by using the Synth Tool thing from Behringer, if you need to.... Now you can hook it up to maschine via MIDI out on maschine to MIDI in on the TD3. Now when you press play on maschine your TD3 should also start and be in sync.
Now you are using the internal sequencer on the TD3 synced to Maschine.

PLease let me know if you still have issues and I will try and help as best I can!

Just a quick edit here, you may have to put the TD3 into Pattern Write Mode to change the SYNC setting.... I can't remember.

 

First off, thank you kindly for helping me out boss.... will these steps above help me with .... In essence, this? :

1. LOAD UP a simple drum kit on my Maschine and then connect the TD3 and have some simple knob turning fun (and record?)
2. Load and play from my TD3 into my Maschine software and capture in the same BPM (or import?) ....

I need help plugging what into where... this is what I have:

• PreSonus AudioBox USB 96 2x2 USB Recording System
  
• NI Maschine MK1
• TD3 (Yellow)

Thank you kindly again....

 

Yep!
You could even connect the TD3 via USB instead of MIDI from the MK1, if you have a spare USB slot on your PC/laptop.
So your MK1 is all set up and working as it should?

 

Hey Geelist

Yes, my Maschine works flawlessly (for now)... My laptop is connected to a USB "hub" and thats' where the TD3, AUDIOBOX USB & Maschine are plugged into... will this work...? I guess I'd need configure the Maschine's software to enable & utilize the TD3 correct...? I tried looking for a diagram of what plugs into what, but I couldn't find one on the internet, I did find Jimmy Hoffa... lol

Lastly, I don't get no TD3 sound out via my monitors even though its plugged into my AUDIOBOX USB (I do if I plug into directly via headphone jack on the TD3 itself)

Again, thank you kindly...

 

Hey!

If you just plug the TD3 into the USB hub it will work providing you set the sync mode to USB on the TD3 (Write/Next + Back and then button 3).
Your TD3 is analogue so you will need to connect the output from the TD3 to the correct input either on your USB Audiobox (I can't be more specific here as I don't know the unit myself) and route it to Maschine's Audio in or just connect the output from your laptop and the output on the TD3 into an external mixer.
Either way should work.