TP + M-Audio Trigger Finger mapping issue (help!)

Sup!

Ok, yesterday I started mapping out my TF with TP but I wasnt able to get the pads to work out right. I got the knobs and the faders but not the pads.

I want to use the pads for the sync, FX and such.

Anyone can help me out w this please!

Oh btw, I'm on a PC not a MAC.

Thanks again!

 

change pads to send cc

you will need to either find a preset on the trigger finger that sends a control change message. the trigger finger was originally designed to be used as a drum pad. so it is velocity sensitive, and sends a note on message from the pads. i had to re-program the trigger finger to make it send cc messages from the pads. now it works great. keep in mind as well that you can use the modifier function in traktor to triple the amount of controllers you have. when you set up your midi map, set modifiers on each mapping to m1=0 and then you can use the same button for another function if you set it to m1=1, and set one of the buttons as a modifier with a value of 1. read the manual for more details on that.... it gets confusing... good luck!

 

Great! Thank you. I will try it tonight and see whats what.