TP3.1 Overide factory map

how do i use the SHIFT buttons to modify other buttons for the new factory override feature?
I'd like to, for example, kill the Bass EQ with SHIFT+FILTER BUTTON. or turn on FLUX REV with SHIFT+FLUX.
or use SHIFT+FLITER BUTTON to move to next filter fx.

also, it seems i can't get buttons to move with deck focus. so if i change FLUX to FLUX REV it only works for a preset Deck even though i change focus with the DECK button. or, in Device Target mode, it only changes the deck i have in focus by clicking it on the screen with my mouse, not the DECK button.

 

You might need to make the Shift button a modifier, and then add in the M=1 on the command you're adding. Remember to un-tick the "Over-ride factory" button or Shift will lose it's shift ability on the other buttons.

Regarding Deck Focus, I'm finding the same issue with the D2 ... it seems that the "Device Target" follows the global "Deck Focus" (as in the focus there the deck letter is orange), and doesn't change to deck A/C or B/D as you shift the D2/S8 left/right screen focus.

This needs to be fixed ... sort of pointless adding the ability to customise controls but then having to hard-code the Device Target and only use 1 deck for each D2 (or 1 pair of decks for the S8).

 

that worked!! unfortunately still can't get deck focus to move with DECK button. i tried changing the Global Settings> Miscelleneous>Deck Focus> from Software to Hardware, but that didn't work.