TP3 MixerFX: Access to all 8+1 effects via MIDI mapping

Discussion in 'Feature Request' started by dj_estrela, Feb 5, 2019.

  1. dj_estrela

    dj_estrela NI Product Owner

    Messages:
    440
    Last edited: Dec 20, 2019
  2. dj_estrela

    dj_estrela NI Product Owner

    Messages:
    440
    bump, to see if more people want this
     
  3. jimmyjamesh

    jimmyjamesh NI Product Owner

    Messages:
    326
    also add the mixer fx to the standard fx suite so people using other mixers eg pioneer can still use the fx
     
  4. ErikMinekus

    ErikMinekus NI Product Owner

    Messages:
    799
    Can't you just go to Preferences > Mixer and enable the Mixer FX in external mixing mode?
     
  5. dj_estrela

    dj_estrela NI Product Owner

    Messages:
    440
    sorry both, the request was unclear. I've now rewrote it.

    PS: MixerFX works fine in internal and external mode; issue is accessing all 8 via MIDI mapping
     
  6. jimmyjamesh

    jimmyjamesh NI Product Owner

    Messages:
    326
    On my pioneer mixer in external mode the colour fx control the pioneer hardware fx.

    If we had the new mixer fx with the norma traktor fx suite we could control with an X1.
     
  7. dj_estrela

    dj_estrela NI Product Owner

    Messages:
    440
    Thats another feature request. Ideally all the 9x mixerfX should run alongside all the 11x macroFX in the FX units. All mapeable.

    And vice versa. All macroFX could be run inside the mixerfx unit. That would be better to free up the FX units for even more stuff.

    I have the same pioneer external behaviour on the ddj-sz and 1000srt.
    For those i set macroFx and mixerFx using the pads
    Please see page 6 of https://github.com/pestrela/music_s...x2_sz_srt/DDJ-SX2_SZ_SRT - Quick Overview.pdf
     
  8. acg3

    acg3 NI Product Owner

    Messages:
    32
  9. dj_estrela

    dj_estrela NI Product Owner

    Messages:
    440
    In my latest mapping I'm able to trigger 4x mixerFX without any buttons.
    Using 4x buttons I can trigger 16x (below the details).

    As such it would be great to access all 8+1 mixerFX that are already coded.

     
  10. dj_estrela

    dj_estrela NI Product Owner

    Messages:
    440
  11. djproben

    djproben NI Product Owner

    Messages:
    537
    +1 for this feature!
     
    • Like Like x 1
  12. Joe121

    Joe121 NI Product Owner

    Messages:
    276
    +1 to have this added


    Sent from my iPhone using Tapatalk