traktor modifiers

any one out there a gun at traktor modifiers..!
i need help with a tricky set of mod's..! !

also i've noticed extra options in the drop down of the modifiers.
for efx .. play.. loop.. tempo .. etc..etc..
cna these be used.. or are they for the kontrol X1

if you ya using a OTUS controller even better...

cheers
BB

 

You can use them in any midi device,
They are something like "STATES" or "Conditions", so if for example u select
Play/Pause->DECK A and set it to "0"
then the command will only work when the Deck A is not Playing
If you had set it to "1" then the command would work only when Deck A is playing


What is that you wanna do with Mods?

 

i have a OTUS..
i'm using a set of 3 (on each side Deck A Deck B) knobs to control the hi mid low of the EQ...

what i want to do is use the button that turns on EFX's ON & OFF (see pic) to act as a mod switch..

so in the ON mode of the button used to turn the efx ON
i want it to switch the 3 EQ's to the 3 Paramiters on the advanced EFX..


if you go to this pic..
http://www.rudy.dj/grafica/otusmap.jpg

you will see the top left corner is the ON OFF button
and the 3 per side EQ's...


i hope this is kinda clear.. what i'm trying to do..!


cheers
BB

 

If i understand Correct you mean the Top Left Scroll and Push button.

That is kinda easy...
(I suppose you have already mapped the FX ON/Off Toggle Button)
First you need to Create a Modifier Toggle Command
You do that by (I'll use M1 as an example)

1. add in->Modifier->M1
2. Hit LEARN and push the button
3. In Mapping Details
Modifier Conditions: M1->0
Type of Controller: Button
Interaction Mode: Direct
Button Option: SET TO=1
4. Then Dubpicate the Command from the Dublicate Button
And Change
Modifier Conditions: M1->1
Button Option: Set To=0

Now You have made a modifier to Toggle

now All you have to do is add/Change the Modifier Condition (in the mapping details)of all the Eq Parameters to M1=0
The Create the New Command for the FX parameters and add/change the Modifier Condition (in the mapping details) to M1=1


So now lets say you are in "Normal mode" and the pots are commanding the EQ
when you'll hit the FX ON/OFF button the FX will go On and now you have the Pots to manage the FX parameters

But If i Were you I 'd try to find a different button for the modifier than the same with On/Off, it would be better. If you think you can spare another Button do it that way