Traktor Scratch Pro clicking noise

I am having issue TSP clicking noise in scratch mode. when I cue at the starting point I can hear glitch noise. I dont have problem with older Traktor Scratch. I can't figure it out. I tried so many things. I turned off wireless and everything. I am using IBM think pad dual core. 4 GB RAM.

help pls.

 

Ye i have to second that, i just bought a new VAIO laptop, P8400 Dual Core, 4GB RAM (Vista) and im getting the same thing. My Latency settings aren't ridiculous either, set to Low Latency at a modest 5ms.

Any help appreciated, ive done a fresh core only install of windows bypassing all of Sonys crapware too!

 

Since you're using windows, look for a better video driver, maybe?

http://www.laptopvideo2go.com/
http://www.omegadrivers.net/

Are worth a look.

(Back stuff up, don't blame me, at own risk, yada yada)

 

I dont think causing it from Video card. There something need to do at TSP.

 

Yeah I seem to have the same or similar problem...it appeared kinda out of the blue. I was using TSP for a while without any problems and now suddenly there is some cracking/clicking noise like the needle is messed up. So i changed the needle...same thing and then I tried it with cd's and I got the same thing again...I have no idea what is causing it. I re-connected everything twice and grounded the equipment so I have no clue now. I did a bit of research and there are quite a few ppl complaining of similar problems.

My set up is a Asus with 4 gb ram, 2ghz dual core 2 running on xp sp3. I have djm 600 with 1210's mk2 that I generally use with traktor but I tried it with cdj's 400 and got the same thing.

I tried messing around with the latency and other preference settings in traktor with no result.


P.S. I only use the above mentioned equipment with traktor so I didn't really change anything...i.e the laptop is for music only so no virus etc...

p.p.s the ram usage is around 25-30 percent 40 with all the filters...

Anyways any help is useful
Thanks

 

Mac user here and I've been experiencing the "clicking cue" ever since I got TSP. I thought the update to 1.1.1 would remedy this problem but it is still there. I'm hoping it's not because of a faulty Audio 8.

 

If you are in Scratch Mode set the timestretch method to ECO?

 

Hey all

I just got a brand new copy of Scratch Pro today and I think this noise you are talking about is what I have. I cant figure what or if I am doing anything wrong. I was a Serato user til today so am familiar with all this so no basic mistakes. My tracks play fine in internal mode, relative mode but when I am in absolute mode I have problems and its to do with noise when a track is cued

With the control CD, when I press cue on the CDJ I hear this awful glitchy sustained noise. Its like some bit crushing effect with a filter ontop (yes, the FX are turned off!) but when I play the track it dissapears. Basically the silence you normally get when you press cue is replaced with this sound.

With the control vinyl, when in absolute mode and when I lift the needle to jump to diff parts of the track, as soon as the needle lifts, Scratch Pro jumps to Relative mode and when I am holding the needle up I hear that noise again.

I cant think of any logical reason for why this is happening but Im hoping that this is easily fixed as I have been looking forward to getting stuck into TSP for a while!

Help!

 

+1

Getting the same issue, replaced my control vinyl's to check it wasn't them.! Got new carts and sylii. tried all latencies, ran dpc checker (all green, good to go) reconnected whole setup cleaned connections.

Tried absolutely everything to get rid of it with no luck!

Intim

 

I have digital artifacts when scratching with my MIDI Pots (Xone 4D)

Audible when doing a very slow scratch. Will test with timecode.