Traktor Z2 + OBS

Hi
is anyone using the z2 and traktor pro 3 with OBS ?
If so can someone point me in the right direction to get the audio through the traktor software.
I've selected the traktor input in OBS but I'm not gettin any audio signal ?

Please Help.

 

I too have this issue. Can anyone please help?

 

Hi,

I use Booth Out to an additional sound card. that sound card is then selected in OBS.

 

As per Libra9's post, I'm pretty sure the booth out to an additional sound card is the best method.

I did manage to get the traktor software to appear as a source in OBS on my macbook pro, but it was the unfiltered sound - so for DVS it was the track + the record sine wave noise, and for vinyl is was both channels at the same time at the same volume.

I figure there's probably some software out there that could take the output from traktor and re-route it as an input - Soundflower for example - but in my brief research it appears far too complicated when the easy option was to output the booth to another computer running OBS.

 

I had the same issue last night. If you select the Z2 as a source you'll get all channels together, basically everything that goes through the Z2.
What you want to do is only use channels 7 and 8 out of the Z2, or route the audio from Traktor Pro to OBS.

Route Traktor Pro to OBS:

Use Loopback like this:


Then use Loopback as your audio input in OBS

Pro: Easiest solution by far
Con: Loopback is expensive

Route Z2's channel 7 & 8 to OBS

Solution 1: Use Audio Hijack like this:



You could also route Traktor like you do with Loopback

Pro: relatively easy but not as easy as Loopback
Cons:

• Doesn't create a virtual interface so you have to route to your global output
• Again, not cheap.

Solution 2: Use Jack Audio like this:


Pro: it's free!
Con: not the easiest to setup

I won't go in the details but if you need some more guidance on Jack I can add step by step instructions.

Hope this helps! Happy mixing and streaming!

 

I have found a way to get it working without any additional hardware or software, by routing internally in windows 10 on my HP Pavilion laptop. For anyone still looking for a solution, you could give this a try:

• In the Audio Settings of Windows 10, under INPUT is the built-in microphone.
• With the Z2 connected and powered on, under this INPUT, the Z2 Output becomes available as an option
• When Z2 output is selected as the Win 10 input, this input can be selected as microphone/aux audio input in OBS

This works great in my setup. I think it probably is pretty universal. Although I have only done recording and no streaming (yet) in OBS.

 

imma try it out. Thank you.

 

And, any luck?

 

I have no issues at all.