1. Please do not install macOS 10.15 Catalina yet, as Native Instruments software and hardware products are not supported under macOS 10.15 yet. For more info, please go HERE!
    Dismiss Notice

User Kit - No Sound - Sampler Start/Stop=0

Discussion in 'MASCHINE Area' started by xAdTx, Nov 24, 2013.

  1. xAdTx

    xAdTx New Member

    Messages:
    4
    I import some User Kits from 1.8.2...
    The Samples are loaded, but in the Sampler the Start and Stop Position is set to 0...
    Now I must move every End Point of the 16 Samples to the real End....

    Why?!?!:angry:
     
  2. FredB7

    FredB7 NI Product Owner

    Messages:
    99
    Got the same thing with an 1.8.2 project, just reloaded it and it was ok.
     
  3. 75er

    75er Forum Member

    Messages:
    137
    Same problem with loops in NI's expansions that I bought. All endpoints are all the way to the left.
     
  4. scheffkoch

    scheffkoch NI Product Owner

    Messages:
    568
    ...try this: first add a new path via preferences / library / user, then leave preferences and select "import 1.x library" and choose your expansion...
     
  5. scheffkoch

    scheffkoch NI Product Owner

    Messages:
    568
    "Same problem with loops in NI's expansions that I bought. All endpoints are all the way to the left."

    ...did you update your old expansions via service center?...
     
  6. sowari

    sowari Moderator Moderator

    Messages:
    27,766
    this.

    there are updates for all Expansions in the Service Centre.

    also, download and install the 2.0.2 update.

    sowari
     
  7. b-righteous

    b-righteous Moderator Moderator

    Messages:
    9,677
    This is the solution. The issue happens when you use the import Maschine 1x on a 3rd party expansion before adding it to the user paths and setting the alias. You must add to paths and set alias first before importing.

    Also as scheffkoch mentioned, don't try to import the NI expansions. There should already be updates to the expansion in your account to download that are M2 compatible.
     
  8. tintala

    tintala NI Product Owner

    Messages:
    284


    THIS WAS IT! Had me confounded.ppfff THANK YOU !
     
  9. 75er

    75er Forum Member

    Messages:
    137
    I'm using the latest updates for Maschine and all my Expansions.
    But this even happens with Resonat Blaze which hasn't even been available for Maschine 1.x ;)
     
  10. b-righteous

    b-righteous Moderator Moderator

    Messages:
    9,677
    Sounds like you ran it through the importer. Don't do that. Reinstall the expansion.