Morning all Can someone help me, is it possible to use a Focusrite 2i2 audio interface for the master sound output and use the control s2 for mixing. I have a pair of powered speakers with one set of RCA's. The spec for the 2i2 is; 24 Bits / 192 kHz 1 x Scarlett microphone preamp Phantom power +48 V Switchable air function 1 Mic input: XLR 1 Line / instrument input: 6.3 mm jack 2 Line outputs: 6.3 mm jack balanced Stereo headphone output: 6.3 mm jack Is is possible to connect the phono outputs of the s2 into the 2i2 using RCA to XLR cable? if so how would I monitor in the headphones and what settings would I have to tweak in the Traktor preferences. I currently use the built in s2 soundcard but would prefer using the 2i2 for master output. Any advice would be greatly appreciated!